Specifications

3-Series Control Systems Crestron CP3& CP3N
4  3-Series Control Systems: CP3 & CP3N Operations Guide – DOC. 7316B
Onboard Control Ports
In addition to Ethernet, the CP3 includes three bidirectional COM ports and eight IR
ports to interface directly with all of the centralized AV sources, video displays, and
other devices. Eight programmable relay ports are included for controlling window
shades, projection screens, lifts, power controllers, and other contact closure actuated
equipment. Eight “Versiport” I/O ports enable the integration of occupancy sensors,
power sensors, door switches, or anything else that provides a dry contact closure,
low-voltage logic, or 0-10 volt dc signal.
BACnet/IP
Native support for the BACnet
®
/IP communication protocol provides a direct
interface to third-party building management systems over Ethernet, simplifying
integration with HVAC, security, fire and life safety, voice and data, lighting,
shades, and other systems. Using BACnet/IP, each system runs independently with
the ability to communicate together on one platform for a truly smart building.*
* License required. The CP3 and CP3N support a maximum of 1000 BACnet objects when dedicated
for BACnet use only. Actual capabilities are contingent upon the overall program size and
complexity.
Specifications
Specifications for the CP3 are listed in the following table.
CP3 Specifications
SPECIFICATION DETAILS
Control Engine
Core 3 OS; real time, preemptive
multi-threaded/multitasking kernel;
Transaction-Safe Extended FAT file system;
supports up to 10 simultaneously running
programs
Memory
SDRAM 512 MB
Internal Flash 4 GB
Memory Card
Expandable storage up to 32 GB using MMC
compatible card (not included)
External Storage
Up to 1 TB using USB mass storage device
(not included)
Communications
Ethernet
10/100 Mbps (10/100/1000 Mbps on CP3N);
auto-switching, auto-negotiating,
auto-discovery, full/half duplex, industry-
standard TCP/IP stack, UDP/IP, CIP, DHCP,
SSL, IEEE 802.1X; SNMP; BACnet/IP
1
;
IPv4 or IPv6, Active Directory authentication,
IIS v.6.0 Web Server, SMTP e-mail client,
installer setup via Crestron Toolbox or
MSIE
2
; supports all e-Control, Core 3 UI
XPanel, Crestron Mobile, Crestron Fusion™
and RoomView
®
applications
(Continued on following page)