Specifications

Crestron CP3 & CP3N 3-Series Control Systems
Operations Guide – DOC. 7316B 3-Series Control Systems: CP3 & CP3N  5
CP3 Specifications (Continued)
SPECIFICATION DETAILS
Communications (continued)
Control Subnet (CP3N Only)
10/100/1000 Mbps Ethernet, auto-switching,
auto-negotiating, auto-discovery, full/half
duplex, DHCP server, DNS server, port
forwarding, Isolation mode
Cresnet Cresnet master mode
USB
Supports USB HID and USB mass storage
class devices via rear panel USB 2.0 host
port, supports computer console via front
panel, USB 2.0 device port
RS-232/422/485
For 2-way device control and monitoring, all
ports support RS-232 up to 115.2k baud with
software handshaking, one port also
supports hardware handshaking, RS-422,
and RS-485
IR/Serial
Supports 1-way device control via infrared
up to 1.2 MHz or serial TTL/RS-232
(0-5 volts) up to 115.2k baud
Power Requirements
Power Pack
2.0 amps @ 24 volts dc,100-240 volts ac,
50/60 Hz power pack, included
Available Cresnet Power
24 watts (1 amp @ 24 volts dc) when using
power pack
Cresnet Power Usage
15 watts (0.625 amp @ 24 volts dc) when
using Cresnet network power
Net ID
3
02
Minimum 3-Series Control
System
®
Update File
4
Version 1.2.16 or later
Environmental
Temperature 41º to 113º F (5º to 45º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 50 Btu/h
Enclosure
Chassis Metal, black finish
Faceplate
Extruded metal, black finish, polycarbonate
label overlay
Mounting
Freestanding or 1U 19-inch rack-mountable
(adhesive feet and rack ears included)
Dimensions
Height 1.70 in (44 mm) without feet
Width
17.28 in (439 mm)
19.00 in (483 mm) with rack ears
Depth 6.56 in (167 mm)
Weight 3.1 lbs (1.42 kg)
Included Accessory
Power Pack 24 volt dc, Universal
(Continued on following page)