Specifications

Electrical Control Interface with AC Crestron CNECI-4A
How to Create the Program
Configuration Manager
Use the Configuration Manager workspace (Project | Configure System) in SIMPL
Windows to select and configure all the devices that need to be included into the
system. For this example, from the Control Systems folder in the Device Library,
select CNMSX-AV. From the Touchpanels (Wired) folder, drop and drag the
CT-3000 symbol into System Views and set the NET ID to 03. Drag and drop the
CNECI-4A (from Network Control Modules folder in the Device Library) into
System Views. The NET ID of the CNECI-4A is set to 7F.
NOTE: SIMPL Windows v1.30.01 or later is required to program the control
system containing a CNECI-4A. If using an earlier version of SIMPL Windows,
Crestron recommends a SIMPL Windows and operating system upgrade. The latest
version can be obtained from the Software Downloads page of Crestron’s website
(www.crestron.com)
. New users are required to register in order to obtain access to
the FTP site.
System View of the CT-3000 in SIMPL Windows’ Configuration Manage
System View of the CNECI-4A in SIMPL Windows’ Configuration Manager
10 • Electrical Control Interface with AC: CNECI-4A Operations Guide - DOC. 8149