Specifications

CRESTRON
Operations Guide - DOC. 8094B Series 3000 Touchpanels •• 5
Physical Views of the CN-RJ11
SIDE VIEW (RJ11 CONNECTOR)
TOP VIEW
SIDE VIEW (4-PIN CONNECTOR)
6-Pin Jack Pinout (for CN-RJ11)
PIN # SIGNAL COLOR
1 +24 V (Network) WHT
2 +24 V (Network) BLK
3 Y (Data) RED
4 Z (Data) GRN
5 GND (Network) YEL
6 GND (Network) BLU
TAB (VISIBLE, ON TOP)
#1
Configuration Differences
There are 12 Series 3000 configurations available and selection depends on color
versus grayscale display, type of installation (tiltcase or lectern mount) and whether
physical buttons for repetitive functions are desired. A configuration is defined by
one of two prefixes, CT- or LC-, and one of six suffixes, no suffix, B, BL, L, /1M,
and L/1M. The CT- or LC- prefix identifies the touchpanel as having either a 256
color display or a 256 grayscale display, respectively. No suffix indicates an
adjustable tiltcase configuration; these units are moveable and can tilt. The “B”
suffix identifies the touchpanel as having feature buttons. The "L" suffix identifies
the touchpanel as a lectern mount. The “/1M” suffix identifies the touchpanel as
having its memory upgraded to 1 Mbyte. Refer to the table below for a concise
listing of each Series 3000 configuration.
Series 3000 Touchpanel Configurations
CONFIGURATION DISPLAY INSTALLATION
FEATURE
BUTTONS
MEMORY
CT-3000 256 Color Movable and can tilt None 256 Kbytes
CT-3000/1M 256 Color Movable and can tilt None 1 Mbyte
CT-3000B 256 Color Movable and can tilt Seven 256 Kbytes
CT-3000L 256 Color Lectern mount None 256 Kbytes
CT-3000L/1M 256 Color Lectern mount None 1 Mbyte
CT-3000BL 256 Color Lectern mount Seven 256 Kbytes
LC-3000 256 Grayscale Movable and can tilt None 256 Kbytes
LC-3000/1M 256 Grayscale Movable and can tilt None 1 Mbyte
LC-3000B 256 Grayscale Movable and can tilt Seven 256 Kbytes
LC-3000L 256 Grayscale Lectern mount None 256 Kbytes
LC-3000L/1M 256 Grayscale Lectern mount None 1 Mbyte
LC-3000BL 256 Grayscale Lectern mount Seven 256 Kbytes