Specifications

Wall Mount 2-Way RF Compact Color Touchpanel Crestron STX-1700CW

“Appendix B: Installation of Optional Pushbuttons” for instructions to install the

optional switches, buttons, and bezel.

NOTE: Two options, 1700C-BTNB (black buttons) or 1700C-BTNS (silver buttons)

can be purchased to provide custom engraved buttons for your touchpanel. Contact

Crestron customer support for more information.

When not docked in the DA-1700CW, the touchpanel is a handheld, 2-way wireless

RF transceiver that communicates through an RF transceiver/gateway, STRFGWX

(sold separately) to the Cresnet system. The 2-way communications provide delivery

of commands to the Cresnet system and provide dynamic onscreen feedback for real-

time confirmation of commands. Up to 15 touchpanels can communicate with one

STRFGWX. The RF signals can travel from a minimum of three feet up to a

maximum of 50 feet indoors (150 feet outdoors). The location of the STRFGWX and

the orientation of the antenna are important factors in the RF performance.

Roaming Feature

This feature allows an STX-1700CW to extend its range from room to room by using

multiple STRFGWX RF gateways. For proper communication, the RF Channel (refer

to Cresnet Interface Menu on page 13) must be the same for the touchpanel with

respect to all gateways in the system. For information on modifying a SIMPL

Windows program for roaming, refer to page 19. For information on optimum RF

reception, refer to “Appendix A: Optimum RF Reception Guidelines” on page 34.

NOTE: Minimum distance between multiple gateways for roaming is three feet; the

maximum is 80 feet. Crestron recommends placing gateways 60 feet apart for

optimum roaming.

Specifications

The table below provides a summary of specifications for the STX-1700CW.

Specifications of the STX-1700CW Touchpanel

SPECIFICATION DETAILS

Power Options

ST-BTPN

AC: Domestic External Adapter

AC: International External Adapter

Rechargeable NiMH battery pack (included)

4100 mAh capacity after full charge.

(Operating time depends on usage.)

12VDC, 1.5A, 120VAC Input (included)

(P/N PW-1215 or equivalent)

12VDC, 1.5A, 230VAC Input (included with

international version touchpanel)

(P/N PWI-1215 or equivalent)

Default Net ID 03

Default RF ID/RF Channel 1/0

Default Timeouts 10 minute for standby

30 minutes for power down

Signal Join Maximums 999 (digital), 256 (analog), 127 (serial)

(continued on next page)

2 • Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW Operations Guide – DOC. 6228A