Specifications

Crestron DM-MD6X1 6X1 DigitalMedia™ Switcher
Operation
The DM-MD6X1 operates in Sync mode and Route mode by using the front panel
buttons.
Sync Mode
Pressing the SYNC button on the front panel will light the LEDs for inputs where
the same signal type is present.
Route Mode
Pressing the ROUTE button on the front panel will allow you to make input routing
changes by pressing the desired input button(s).
NOTE: When the signal type on RGB IN 2 is RGB, switching to this input can take
eight to ten seconds because the DM-MD6X1 must autocalibrate the RGB input
signal. If the signal type on RGB IN 2 is composite, S-video or component,
switching will take the normal three to five seconds.
Operations Guide – DOC. 6850D 6X1 DigitalMedia™ Switcher: DM-MD6X1 • 31