Specifications

DMPS-200-C
DigitalMedia
Presentation System 200
crestron.com
|
800.237.2041
> High-Definition multimedia system switcher, mic
mixer, audio DSP, amplifier, and control system
> Integrated DigitalMedia
switcher featuring
DM 8G+
technology
> HDBaseT
®
Certified — Enables direct connection
to third-party HDBaseT devices
> Matrix signal routing for up to 6 sources and
2 displays
> Handles HDMI
®
, DVI, DisplayPort Multimode,
HDBaseT and SPDIF digital sources
> Handles RGB, composite, S-Video, component, and
stereo audio analog sources
> Features auto-detecting, auto-switching inputs for all types of
video and audio sources
> Includes built-in 4-channel gated microphone mixing w/DSP
> Affords versatile audio signal mixing and routing to
5 separate outputs
> Allows audio-follow-video or breakaway switching for all inputs
> Enables HDMI audio signal extraction and embedding
> Provides 3 stereo analog outputs with independent DSP
per output
> Features built-in 40 Watt amplifier, selectable for 8 Ohm stereo or
70/100 Volt mono operation
> Multi-channel PCM, Dolby
®
, and DTS
®
audio signals can be
routed to the HDMI and DM 8G+ outputs
> DigitalMedia 8G+
connectivity affords single-wire CAT5e
interface for remote source and display devices
[2]
> Furnishes Power over DM
®
or HDBaseT for
PoDM/PoH-powered devices
[3]
> QuickSwitch HD
®
technology manages HDCP keys for fast,
reliable switching
> Auto-Locking
technology achieves rapid switching between
disparate sources
> Performs automatic AV signal format management via EDID
> Scaler options provide discrete image optimization for each
display device
> Integrated Ethernet switch provides a single-point
LAN connection
> Private Network Mode — requires just two IP addresses for the
complete system
> 2-Series control system provides fully-programmable
device control
> Supports Crestron
®
touch screens, keypads, and
wireless remotes
> XPanel with Smart Graphics
computer and Web based control
> iPhone
®
, iPad
®
, and Android
control app support
> Crestron Fusion
®
Enterprise Management Software support
> SNMP support
> Provides easy setup and diagnostics via front panel or software
> Internal universal power supply for worldwide compatibility
> 3-space 19-inch rack-mountable
The DMPS-200-C from Crestron
®
is a complete, high-definition
presentation control and signal routing solution for classrooms, board-
rooms, lecture halls, and videoconference rooms. Integrating the control
system, multimedia matrix switcher, mic mixer, audio DSP, and amplifier
all into one 3-space rack mount package, the DMPS-200-C affords flexible
signal routing and high-performance signal processing without the need
for separate components. Auto-configuring inputs enable plug-and-play
compatibility with a wide range of digital and analog sources. Built-in
DigitalMedia
and HDBaseT
®
connectivity afford a streamlined wiring
solution for interfacing with remote AV sources, computers, and
display devices.
HD System Switcher
The DMPS-200-C provides high-performance routing of numerous digital
and analog sources to two separate projectors, flat panel displays, codecs,
touch screens, and other devices. Connectivity is provided for up to five
HDMI
®
sources
[1]
, or other combinations of HDMI, RGB, SPDIF, analog
audio, and analog video sources (plus additional remote sources via DM
8G+
or HDBaseT). Input auto-detection and auto-switching eliminates
the need to configure the inputs - simply connect your source and the
DMPS-200-C selects the right audio and video combination. Built-in matrix
switching allows routing of six different sources to two separate digital AV
devices and three analog audio components.
Flexible Audio Routing
The HDMI, SPDIF, and analog audio inputs may be configured to
follow their associated video inputs, or switched independently. In fact,
the audio from any HDMI source can be extracted from the digital stream
and converted to analog to feed an outboard processor, mixer, or codec,
with the return signal feeding back through any analog input, which can be
embedded with any video source to form a new HDMI output. Routing of
multi-channel PCM, Dolby
®
, and DTS
®
audio sources is supported through
the HDMI and DM 8G+ outputs. The HDMI, SPDIF, and analog audio inputs
include adjustable input compensation to accommodate a wide range of
signals and maintain consistent volume levels when switching
between sources.

Summary of content (8 pages)