Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
6
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
Auto-Locking Technology
Crestron Auto-Locking technology enables super fast signal switching by
instantaneously configuring every device in the signal path, including DM
transmitters, DM receivers, and scalers, as soon as the signal hits the first device.
Whether switching between sources or TV channels, Auto-Locking significantly
reduces the time it takes each device to sense the new signal and configure itself to
handle the changes, virtually eliminating any noticeable gap while switching.
Built-in Ethernet Switch
In addition to transporting digital video and audio, the DigitalMedia 8G+ ports on the
DMPS-100/200/300-C can also extend Ethernet out to each display and source device,
providing high-speed connectivity for each room device that requires a LAN
connection. Ethernet is also utilized internally by the Crestron control bus to manage
each transmitter and receiver and provide device control.
Private Network Mode
To streamline its implementation on a corporate or university LAN, the
DMPS-100/200/300-C employs Private Network mode to provide a single-point
connection for the complete system. Using Private Network mode, the
DMPS-100/200/300-C requires just one IP address for the complete DM network,
plus one additional IP address for the built-in control processor.
Integrated Control System
Its built-in 2-Series control system enables the DMPS-100/200/300-C to provide
complete, customizable control of every AV device, as well as room lighting, window
shades, and projection screens, without requiring a separate control processor. The
DMPS-100/200/300-C supports the full line of Crestron touch screens, keypads, and
wireless remotes for a user experience custom tailored to the specific requirements of
each end-user. Support for Crestron control apps and Crestron Fusion Enterprise
Management Software delivers the industry’s most powerful platform for remotely
controlling and managing multiple rooms using computers and mobile devices.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control
desired for a seamless user experience. In addition to conventional IR, RS-232, and
Ethernet device control, the DMPS-100/200/300-C can provide an additional
alternative by harnessing the CEC (Consumer Electronics Control) signal embedded
in HDMI. The DMPS-100/200/300-C provides a gateway for controlling many
devices right through their HDMI (or HDBaseT) connections, potentially eliminating
the need for any dedicated control wires or IR emitters. Through proper CEC signal
management, the DMPS-100/200/300-C permits control of each device as desired.
Easy Setup
Every step of the DMPS-100/200/300-C setup process is designed to be quick and
easy using its front panel or Crestron Toolbox software, configuring inputs and
outputs automatically while letting the installer make intelligent design decisions
along the way. Out of the box, the DMPS-100/200/300-C’s front panel supports basic
signal routing for easy testing and troubleshooting during installation. The front panel
label strips can be customized using Crestron Engraver software or standard 3/8" (~10
mm) tape labels, allowing for the clear designation of each input and output. Inputs
and outputs may also be designated by name through the software to appear on the
LCD display.