Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
16
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
DMPS-100/200/300-C Specifications (Continued)
SPECIFICATION DETAILS
Audio
Typical of Analog Line
Outputs with DSP (Continued)
Codec 1 – 2
(DMPS-300-C-AEC)
-80.0 to +10 dB level adjustment range plus
mute and balance (Codec 1 available at
Program Out and Aux 2 out only, Codec 2
available at Program Out and Aux 1 out only
Master Volume -80.0 to +10 dB level adjustment range, plus
mute
Mixer Presets 1 through 5
Bass ±12.0 dB
Treble ±12.0 dB
Equalization 10-band graphic plus 2-band parametric
GEQ Center Frequencies 31.5 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz,
1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz
GEQ Gain ±12.0 dB per band
GEQ Presets 1 through 10
PEQ Center Frequencies 5 Hz to 24 kHz per band
PEQ Gain -36.0 to +24.0 dB per band
PEQ Bandwidth 0.02 to 3.50 octaves per band
PEQ Types Peaking EQ, High Pass, Low Pass, High
Shelf, Low Shelf, Notch
PEQ Presets 1 through 5
Delay 0.0 to 85.3 ms
Frequency Response 20 Hz to 20 kHz ±0.5 dB (digital source),
20 Hz to 20 kHz ±0.5 dB (analog line
source), 20 Hz to 20 kHz ±0.7 dB
(microphone source)
S/N Ratio >108 dB (digital source), >103 dB (analog
line source), 1 kHz, A-weighted
THD+N <0.002% (digital source), <0.005% (analog
line source), <0.05% (microphone source),
20 Hz to 20 kHz
Stereo Separation >108 dB (digital source)
>103 dB (analog source)
Channel Separation >103 dB
AEC Reference Output
(Internal)
Source -80.0 to +10.0 dB, level adjustment range,
plus mute and balance
Codec 1 – 2 -80.0 to +10.0 dB, level adjustment range,
plus mute and balance
Master Volume -80.0 to +10.0 dB, level adjustment range,
plus mute
Mixer Presets 1 through 5
Base ±12.0 dB
(Continued on following page)