Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
19
DMPS-100/200/300-C Specifications (Continued)
SPECIFICATION DETAILS
Available Accessories
(Continued)
CNXRMIRD IR Receiver
CRESNET Cresnet Control Cable
Crestron App Control App for Apple
®
iOS
Crestron Mobile Pro
®
Control App for iPhone, iPad, and Android Devices
Crestron App for
Samsung Smart TV
®
Control App for Samsung Smart TV
CSP-LIR-USB IR Learner
DM-8G-CONN-100 DigitalMedia 8G Cable Connectors
DM-8G-CONN-WG DigitalMedia 8G Cable Connector with Wire Guides
DM-8G-CRIMP Crimping Tool for DM-8G-CONN
DM-8G-CRIMP-WG Crimping Tool for DM-8G-CONN-WG
DM-CBL-8G DigitalMedia 8G Cable
DM-RMC-100-C DigitalMedia 8G+ Receiver and Room Controller
100
DM-RMC-200-C DigitalMedia 8G+ Receiver and Room Controller
200
DM-RMC-SCALER-C DigitalMedia 8G+ Receiver and Room Controller
with Scaler
DM-TX-200-C-2G Wall Plate DigitalMedia 8G+ Transmitter 200
DM-TX-201-C DigitalMedia 8G+ Transmitter 201
DM-TX-401-C DigitalMedia 8G+ Transmitter 401
Fusion EM
®
Energy Management Software
Fusion RV
®
Remote Asset Management Software
HD-SCALER High-Definition Video Scaler
HD-TX3-C HDMI over HDBaseT Transmitter
HD-RX3-C HDMI over HDBaseT Receiver
IRP2 IR Emitter Probe
MP-WP Series Media Presentation Wall Plates
MPI-WP Series Media Presentation Wall Plates—International
Version
PW-4818DU 90W PoDM Power Pack for DMPS
RoomView
®
Express Remote Help Desk and Resource Management
Software
XPanel Crestron Control
®
for Computers
1. Item(s) sold separately.
2. The RGB inputs can accept component, composite, and S-video signals via direct interface to Crestron
MPS Series products, or through an appropriate adapter (not included). Input sync detection is not
provided for composite or S-video signal types through the RGB connection.
3. Deep Color and 3D video signals are only supported via HDMI inputs 1 and 2, and DM inputs 6 and 7.
4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI interface cables available separately.
5. When a digital audio input (HDMI, DM, or S/PDIF) is routed to an HDMI or DM output, that output is
put in pass-through mode so that the digital input is the only signal that passes to that output and the
audio controls on that output have no effect.