Specifications

ManualsBrandsCrestron ManualsProjectorDMPS-300-C-AEC

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC

•

DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E

Connectors, Controls, and Indicators (Continued)

# CONNECTORS,

CONTROLS, AND

INDICATORS

DESCRIPTION

27 SPEAKER OUTPUT

(2) 2-pin 7.62 mm 15 A detachable terminal

blocks;

4 – 8 ohm stereo speaker level audio output;

Wire size: Terminals accept up to 14 AWG

Output power: 20 W RMS per channel stereo

at 8 ohms, 4 ohms tolerant;

Driven by program audio output

NOTE: 4 ohms/8 ohms and 70/100 V outputs

are mutually exclusive.

28 SPEAKER OUTPUT

(1) 3-position slide switch, selects the

amplifier output configuration

29 SERVICE

(1) USB Type B female, for factory use only

30 SPEAKER OUTPUT

(1) 2-pin 7.62 mm 15 A detachable terminal

block;

Transformer-isolated 70 or 100 volt mono

speaker-level audio output;

Wire size: Terminals accept up to 14 AWG;

Output power: 40 W RMS mono at 70 or 100

volts;

Driven by program audio output

NOTE: 4 ohms/8 ohms and 70/100 V outputs

are mutually exclusive.

31 PoDM

(1) 4-pin snap and lock power jack;

48 volt power input for PoDM power pack,

sold separately;

Enables Power over DM

32 PROG OUT

L + - G + - R

(1) 5-pin 3.5 mm detachable terminal block;

Balanced/unbalanced stereo line level audio

output;

Output impedance: 200 ohms balanced, 100

ohms unbalanced;

Maximum output level: 4 Vrms balanced, 2

Vrms unbalanced

33 100-240 V – 4.0 A

50/60 Hz

(1) IEC 60320 C14, mains power inlet;

Mates with removable power cord, included

(Continued on following page)