Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System

Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC

•

5. The RGB inputs can accept component, composite, and S-video signals via direct interface to Crestron

MPS Series products, or through an appropriate adapter (not included). Input sync detection is not

provided for composite or S-video signal types through the RGB connection.

6. Refer to the following table for the RGB IN connector pinouts.

PIN # RGB YPbPr S-VIDEO COMPOSITE

1 R Pr C

2 G Y Y

3 B Pb Comp

13 H

14 V

7. Supplying Power over DM (PoDM) requires external power pack, sold separately.

8. For DM 8G+ wiring up to 330 ft (100 m) between devices, use Crestron DM-CBL-8G DigitalMedia 8G

cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic

CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to safeguard against

unpredictable environmental electrical noise which may impact performance at resolutions above

1080p. Refer to the Crestron DigitalMedia Design Guide (Doc. 4546) for complete system design

guidelines. All cable sold separately.