Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC

•

DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E

To install the ears, use the following procedure:

CAUTION: To prevent equipment damage, use only the rack ears Crestron provides

for this device.

1. There are screws that secure each side of a DMPS-100/200/300-C top cover.

Using a #1 or #2 Phillips screwdriver, remove the three screws closest to the

front panel from one side of the unit. Refer to the diagram following step 3

for a detailed view.

2. Position a rack ear so that its mounting holes align with the holes vacated by

the screws in step 1.

3. Secure the ear to the unit with three screws from step 1, as shown in the

following diagram.

Ear Attachment for Rack Mounting

4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the

opposite side.

Stacking

Four feet are provided with the DMPS-100/200/300-C so that if the unit is not rack

mounted, the rubber feet can provide stability when the unit is placed on a flat

surface or stacked. These feet should be attached prior to the hookup procedure.

Refer to the following illustration for placement of the feet.