Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
40
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
Configuration and Operation
The DMPS-100/200/300-C can be used for audio and video switching without any
programming required. This is ideal for those that need a basic audio-video switching
system. Prior to operation, the DMPS-100/200/300-C must be configured for use.
Configuration
The DMPS-100/200/300-C is configured using the built-in “Setup Menu”.
Access the “Setup Menu”
Access the “Setup Menu”:
1. Press the POWER button to turn on the system.
2. Press the MENU button. Instructions for entering the numeric password are
displayed followed by a blinking cursor that prompts entering of the password.
Enter Password
NOTE: The default password is 12345. It can be changed within the “Control
Setup” menu. Refer to “Change the Front Panel Password” on page 58 for more
information.
3. Turn the VOLUME control until the correct digit (0 through 9) appears.
4. Press the
 button to move the cursor to the next digit and select the next digit
in the password with the VOLUME control. Press the
 button to move to a
previous digit.
5. Press ENTER once the entire password is displayed. If an incorrect password is
entered, the display shows “Invalid Password” and returns to the “Enter
Password:” screen.
Exit the “Setup Menu”
Exit the “Setup Menu”:
1. While in the “Setup Menu”, press the MENU button to exit the menu.
Exit Menu Prompt
2. Press the button under Yes to exit the menu or press the button under No to
return to the menu.
NOTE: When the system is being configured, system operation is suspended.
Enter Password:
_