Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
45
Set the
Program Minimum Volume
The “Prog. Min Volume” menu is used to set the lowest volume level of the program
output.
Set the program minimum volume level:
1. Access the “Program Output” menu as described on page 43.
2. Press the
 or  buttons until Min Volume is displayed on the LCD and press
ENTER to display the “Prog Min Volume” menu.
“Prog. Min Volume” Menu
3. Adjust the program minimum volume level with the
 and  buttons. The
highest program minimum volume level is 50%.
NOTE: While adjusting the program minimum volume level, the program
volume level can be adjusted by turning the VOLUME control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the
Program Maximum Volume
The “Prog. Max Volume” menu is used to set the highest volume level of the
program output.
Set the program maximum volume level:
1. Access the “Program Output” menu as described on page 43.
2. Press the
 or  buttons until Max Volume is displayed on the LCD and press
ENTER to display the “Prog. Max Volume” menu.
“Prog. Max Volume” Menu
3. Adjust the program maximum volume level with the  and  buttons. The
lowest program maximum volume setting is 70%.
NOTE: While adjusting the program maximum volume level, the program
volume level can be adjusted by turning the VOLUME control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Adjust the
Program Startup Volume
The “Prog. Startup Vol.” menu is used to establish the program output’s volume
level setting when an input is selected.
Adjust the program startup volume level:
1. Access the “Program Output” menu as described on page 43.
2. Press the  or  buttons until Startup Vol. is displayed on the LCD and press
ENTER to display the “Prog. Startup Vol.” menu.