Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
47
2. Press the  or  buttons until the Aux. 1 Output or Aux. 2 Output is displayed
on the LCD, and press ENTER to display the “Aux. 1 Output” or “Aux. 2
Output” menu.
3. To return to the “Audio Setup” menu, press MENU.
Set the
Auxiliary Output Source Mix
Set the auxiliary output source mix:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described above.
2. Press the
 or  buttons until Source Mix is displayed on the LCD and press
ENTER to display the “Aux. 1 Source Mix” menu.
“Aux. 1 Source Mix” Menu
3. Press the
 or  buttons until the desired setting is displayed on the LCD. The
current setting is indicated with an asterisk (*). The following settings are
available:
• Aud. Only sends the audio signal from the selected source to the AUX OUT
connector.
• Mic. Only sends the microphone input signals to the AUX OUT connector.
• Mic + Aud sends a mix of the audio signal from the selected source and the
microphone input signals to the AUX OUT connector.
NOTE: While setting the auxiliary output source mix, the auxiliary volume
level can be adjusted by turning the VOLUME control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the volume,
the display changes to indicate the volume level.
4. Press ENTER to save changes and return to the previous screen. To cancel
without saving changes, press MENU.
Set the
Auxiliary Output Bass Level
Set the auxiliary output bass level:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described above.
2. Press the
 or  buttons until Bass is displayed on the LCD and press
ENTER to display the “Aux. 1 Bass” menu. The current bass level is displayed.
“Aux. 1 Bass” Menu
3. Adjust the auxiliary output bass level with the
 and  buttons.
NOTE: While adjusting the auxiliary output bass level, the auxiliary output
volume level can be adjusted by turning the VOLUME control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.