Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
48
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
Set the
Auxiliary Output Treble Level
Set the auxiliary output treble level:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described on page 46.
2. Press the
 or  buttons until Treble is displayed on the LCD and press
ENTER to display the “Aux. 1 Treble” menu. The current treble level is
displayed.
“Aux. 1 Treble” Menu
3. Adjust the auxiliary output treble level with the
 and  buttons.
NOTE: While adjusting the auxiliary output treble level, the auxiliary output
volume level can be adjusted by turning the VOLUME control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the
Auxiliary Output Delay Level
Set the auxiliary output delay level:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described on page 46.
2. Press the
 or  buttons until Aux. 1 Delay is displayed on the LCD and press
ENTER to display the “Aux. 1 Delay” menu. The current delay time is
displayed.
“Aux. 1 Delay” Menu
3. Adjust the auxiliary delay time with the
 and  buttons.
The highest possible auxiliary delay time is 85 milliseconds.
NOTE: While adjusting the auxiliary output delay level, the auxiliary output
volume level can be adjusted by turning the VOLUME control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the Auxiliary Output
Minimum Volume
The auxiliary output minimum volume control is used to set the lowest volume level
of the auxiliary output.
Set the auxiliary output minimum volume level:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described on page 46.
2. Press the
 or  buttons until Min Volume is displayed on the LCD and press
ENTER to display the “Aux. 1 Min Volume” menu.
“Aux. 1 Min Volume” Menu