Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
50
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
Input Compensation
The input compensation level of each analog audio input can be set from the
DMPS-100/200/300-C’s front panel. The line outputs are not affected by changes
made to the input compensation level.
Set the
Input Compensation Level
Set the input compensation level for an input:
1. Access the “Audio Setup” menu described on page 41.
2. Press the
 or  buttons until Input Compensation is displayed on the LCD
and press ENTER to display the “Input Compensation” menu.
“Input Compensation” Menu
3. To select the input to adjust, press the
 or  buttons until the desired input is
displayed and press ENTER. Inputs include Analog 1 – 5, S/PDIF, ATC, HDMI
1-5, DM 6, and DM 7.
NOTE: Not all inputs are present on the DMPS-100-C or DMPS-200-C devices.
“Analog In 1 Comp” Menu
4. Adjust the input compensation level with the
 and  buttons. Compensation
can range from -10 dB to 10 dB. A compensation level of 0 dB provides no
compensation.
NOTE: While adjusting the compensation level, the master volume level can
be adjusted by turning the VOLUME control clockwise to raise the volume, or
counterclockwise to lower the volume. When adjusting the volume, the display
changes to indicate the volume level.
5. Press MENU or ENTER to save changes and return to the “Input
Compensation” menu.
6. Repeat steps 3 through 5 for each input to be adjusted.
7. Press MENU to return to the “Audio Setup” menu.
Microphones
The DMPS-100/200/300-C can be connected to several microphones (two for
DMPS-100-C, four for DMPS-200-C, and six for DMPS-300-C). Matrix mixing
allows for a completely different stereo mix of all microphones at each of the
DMPS-100/200/300-C's outputs. The microphone inputs feature switchable gating,
compression, and limiters.
Access the
“Microphones” Menu
Access the “Microphones” menu:
1. Access the “Audio Setup” menu as described on page 41.
2. Press the  or  buttons until Microphones is displayed on the LCD, and