Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System

Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC

•

the character to be deleted and press the button under Del. To insert a space,

position the cursor where the space is to be inserted and press the button under

Ins.

5. Press ENTER to save the new name and return to the “Sel. Input to Name”

menu or press MENU to cancel the operation and return to the “Sel. Input to

Name” menu.

6. After all inputs have been named, press MENU to return to the “Video Setup”

menu.

Select Input Type

Specify the signal types expected by each of the inputs:

1. Access the “Video Setup” menu as described on the previous page.

2. Press the

 or  buttons until Input Types is displayed on the LCD and press

ENTER to display the “Sel. Input Type” menu.

“Sel. Input Type” Menu

3. Press the

 or  buttons to select the video input to be set up and press

ENTER. The current setting is indicated with an asterisk (*).

4. Press the

 or  buttons until the desired input type is displayed. Depending

on the DMPS-100/200/300-C model, input types can include HDMI 1-2,

HDMI/VGA 3, HDMI/VGA 4, HDMI/VGA/COMP, DM 1, and DM 2.

“Select Input 1 Type” Menu

5. Press ENTER to save the input type and return to the “Sel. Input Type” menu

or press MENU to cancel the operation and return to the “Sel. Input Type”

menu.

6. After all inputs have been set up, press MENU to return to the “Video Setup”

menu.

NOTE: For inputs 3, 4, and 5, there is no audio output if the audio input type is set to

HDMI, and the video input type is set to something other than HDMI.

Name Video Outputs

The DMPS-100/200/300-C ships with default names assigned to each of the outputs.

Change the output names:

1. Access the “Video Setup” menu as described on page 52.

2. Press the

 or  buttons until Output Names is displayed on the LCD and

Press ENTER to display the “Sel. Output to Name” menu.

“Sel. Output to Name” Menu

3. Press the  or  buttons until the output to be named is displayed on the LCD