Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC

•

DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E

and press ENTER. The cursor is placed after the last character in the output

name.

Output Name Change Screen

4. Turn the VOLUME control clockwise or counterclockwise (or press the

 or

 buttons) to select a new letter (uppercase or lowercase) or number. Move the

cursor by pressing the buttons under the < or > symbols. Each output name can

be up to 14 characters in length. To delete a character, position the cursor under

the character to be deleted and press the button under Del. To insert a space,

position the cursor where the space is to be inserted and press the button under

Ins.

5. Press ENTER to save the new name and return to the “Sel. Output to Name”

menu or press MENU to cancel the operation and return to the “Sel. Output to

Name” menu.

6. After all outputs have been named, press MENU to return to the “Video Setup”

menu.

Network Setup

The network settings of the DMPS-100/200/300-C can be configured from the front

panel using the “Network Setup” menu.

NOTE: Some changes to network settings may require a reboot to take effect. The

system automatically reboots when necessary.

Access the “Network Setup”

Access the “Network Setup” menu:

1. Access the “Setup Menu” as described on page 40. Press the

 or  buttons

until Network Setup is displayed on the LCD.

2. Press ENTER to display the “Network Setup” menu.

3. To exit the “Network Setup” menu, press MENU.

Set the IP Address

The DMPS-100/200/300-C uses TCP/IP for communications between network

devices, a PC, and RoomView Help Desk software. The IP address can be manually

set or obtained from a DHCP server. For information on using DHCP to obtain an IP

address, refer to “Set the DHCP Status” on page 56. Manually set an IP address:

1. Access the “Network Setup” menu as described above.

2. Press the

 or  buttons until IP Address is displayed on the LCD and press

ENTER to display the “IP Address” menu. The current IP address is shown.

“IP Address” Menu

3. Turn the VOLUME control clockwise or counterclockwise to select a number

in the left-most section of the IP address. Numbers can also be selected by

pressing the  or  buttons.