Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
56
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
cursor to the right-most section and press ENTER. To cancel the operation and
return to the “Network Setup” menu, press MENU.
Set the DHCP Status
The IP address can be obtained from a DHCP server or manually set. For
information on manually setting the IP address, refer to “Set the IP Address” on page
54. Set the DHCP status:
1. Access the “Network Setup” menu as described on page 54.
2. Press the
 or  buttons until DHCP is displayed on the LCD and press
ENTER to display the “DHCP” menu.
“DHCP” Menu
3. Press
 and  buttons to toggle between On and Off. The current setting is
indicated with an asterisk (*).
4. To save the setting and return to the “Network Setup” menu, press ENTER. To
cancel the operation and return to the “Network Setup” menu, press MENU.
Set the WINS Mode
The DMPS-100/200/300-C can use a WINS server to obtain an IP address. Use a
WINS server:
1. Access the “Network Setup” menu as described on page 54.
2. Press the
 or  buttons until WINS is displayed on the LCD and press
ENTER to display the “WINS” menu.
“WINS” Menu
3. Press the
 and  buttons to toggle between On and Off. The current setting is
indicated with an asterisk (*).
4. To save the setting and return to the “Network Setup” menu, press ENTER. To
cancel the operation and return to the “Network Setup” menu, press MENU.
View and Set the HostName
The DMPS-100/200/300-C can be recognized by its hostname in a networked
environment. Set the hostname:
1. Access the “Network Setup” menu as described on page 54.
2. Press the
 or  buttons until HostName is displayed on the LCD and press
ENTER to display the current “HostName.”
Typical “Hostname” Screen
3. Press ENTER to change the current name. A cursor is placed at the last
character in the name.