Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
58
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
3. Press MENU to return to the “Network Setup” menu.
Control Setup
Basic control system operations can be performed from the DMPS-100/200/300-C
front panel using the “Control Setup” menu.
Access the “Control Setup”
Menu
Access the “Control Setup” menu:
1. Access the “Setup Menu” as described on page 40. Press the
 or  buttons
until Control Setup is displayed on the LCD.
2. Press ENTER to display the “Control Setup” menu.
3. To exit the “Control Setup” menu, press MENU.
Change the Backlight Level
The brightness of the LCD’s backlight can be adjusted for ease of viewing. Adjust
the brightness level from the front panel:
1. Access the “Control Setup” menu as described above.
2. Press the
 or  buttons until Backlight is displayed on the LCD and press
ENTER to display the “Select Brightness” menu.
“Select Brightness” Menu
3. Press the
 or  buttons to select a brightness level (Low, Medium, or High).
An asterisk (*) appears to identify the current setting.
4. To save the desired setting and return to the “Control Setup” menu, press
ENTER. To cancel the operation and return to the “Control Setup” menu, press
MENU.
Change the Front Panel
Password
The front panel password can be changed from the front panel:
1. Access the “Control Setup” menu as described above.
2. Press the
 or  buttons until Password is displayed on the LCD and press
ENTER to display the “Change Passwd” screen. (An existing password is not
shown.)
“Change Passwd” Screen
3. Turn the VOLUME control to set the first digit (0 – 9) in the password.
4. Press the k and j buttons to move the cursor to each digit position and set each
digit with the VOLUME control. The maximum password length is 20 digits.
5. To save the new password and return to the “Control Setup” menu, press
ENTER.
6. To cancel the process without saving any changes, press MENU. The display
returns to the “Control Setup” menu.
View System Information
Use the front panel to view information about the DMPS-100/200/300-C.
Information that can be viewed includes program information, hardware information,
network information, and operating system information.