Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
59
NOTE: This information can also be viewed using Crestron Toolbox. For more
information, refer to the Crestron Toolbox help file.
1. Access the “Control Setup” menu as described on page 58.
2. Press the
 or  buttons until Info is displayed on the LCD and press ENTER
to display the “Info” menu.
“Info” Menu
3. To view program information, press the button under REMS.
“Program Boot Directory” Screen
4. Press the
 or  buttons to see other information. If partial information is
displayed, press the buttons under the << or >> symbols to view the rest of the
information.
5. Press the MENU button to return to the “Info” menu.
6. To view hardware information, press the button under HW.
Hardware Information Screen
7. Press the
 or  buttons to see other information. If partial information is
displayed, press the buttons under the << or >> symbols to view the rest of the
information.
8. Press the MENU button to return to the “Info” menu.
9. To view a list of connected network devices, press the button under NET. (If no
network devices are connected, No Network Devices Found is displayed.)
Connected Network Devices Screen
10. Press the
 or  buttons to see other network devices. If the information for a
network device is partially displayed, press the soft buttons labeled << or >> to
view the rest of the information.
11. Press the MENU button to return to the “Info” menu.