Specifications

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
60
•
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219E
12. To view information on the DMPS-100/200/300-C operating system, press the
button under OPS.
Operating System Information Screen
13. Press the buttons under the symbols << or >> to view the information that
cannot fit on the display.
14. Press the MENU button to return to the “Info” menu.
15. To return to the “Control Setup” menu, press MENU.
Review System Messages
The DMPS-100/200/300-C stores system messages in a message log. Review system
messages using the front panel:
1. Access the “Control Setup” menu as described on page 58.
2. Press the
 or  buttons until Messages is displayed on the LCD and press
ENTER to display the viewing controls.
System Message Viewing Controls Screen
3. To scroll through messages in the log, press the
 or  buttons.
4. To jump to the last message in the log, press the button under Btm.
5. To jump to the beginning of the log, press the button under Top (not shown).
6. To view the contents of a message, press the buttons under the symbols << or
>>.
7. To erase the contents of the log, press the button under Clear.
8. Press MENU to return to the “Control Setup” menu.
NOTE: The contents of the message log can also be read and saved using Crestron
Toolbox. For more information, refer to the Crestron Toolbox help file.
Set the Date and Time
Use the front panel to set the DMPS-100/200/300-C’s date and time.
1. Access the “Control Setup” menu as described on page 58.
2. Press the
 or  buttons until Time/Date is displayed on the LCD and press
ENTER to display the date and time controls.
Date and Time Controls Screen