Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
61
3. To set the date, press the button under DATE. The date controls are displayed.
Date Controls Screen
4. To set the month, press the button under MO. To set the day, press the button
under DAY. To set the year, press the button under YR. A pair of brackets
appears around the selected part of the date.
5. Press the
 or  buttons to increase or decrease the value of the selected part
of the date.
6. Repeat for each part of the date.
7. Press ENTER to store the new date values and return to the “Time/Date”
controls or press MENU to return to the “Time/Date” controls without saving
any changes.
8. To set the time, press the button under TIME. The time controls are displayed.
Time Controls Screen
9. To set the hour, press the button under HR. To set the minute, press the button
under MIN. To set AM or PM, press the button under AM/PM. A pair of
brackets appears around the selected part of the time.
10. Press the
 or  buttons to increase or decrease the value of the selected part
of the time.
11. Repeat for each part of the time.
12. Press ENTER to store the new time and return to the “Time/Date” controls or
press MENU to return to the “Time/Date” controls without saving any changes.
13. To return to the “Control Setup” menu, press MENU.
NOTE: The date and time can also be set using Crestron Toolbox. For more
information, refer to the Crestron Toolbox help file.
Restore Default Settings
The DMPS-100/200/300-C can be restored to its default factory settings from the
front panel. Users can select to restore only the audio settings or to restore the audio
settings, source names, output names, and function names.
Restore audio settings only:
1. Access the “Control Setup” menu as described on page 58.
2. Press the
 or  buttons until Defaults is displayed on the LCD and press
ENTER to display the “Restore Defaults” screen.