Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
63
“Front Panel Lock” Controls Screen
3. Press the
 or  buttons to toggle between On and Off. The current setting is
indicated with an asterisk (*).
4. Press ENTER to save the desired setting and return to the “Control Setup”
menu.
Default System Operation
The following describes operation of a default system.
Turn On the System
Turn on the system:
1. Select an output by pressing any of the output buttons:
1–4, PROG, AUX 1 or AUX 2 (PROG, AUX 1 and AUX 2 are audio only).
2. Select any of the source inputs by pressing an input button (1–7).
Turn Off the System
To turn off the system, press the POWER button twice.
Adjust the Volume Level
The volume level of the DMPS-100/200/300-C is adjusted with the VOLUME
control knob. The VOLUME control knob only controls the volume parameter that
was selected when the Volume Control mode was specified.
• To raise the volume, turn the VOLUME control clockwise. The volume level is
displayed on the LCD.
• To lower the volume, turn the VOLUME control counterclockwise. The volume
level is displayed on the LCD.
Mute Audio
The audio output of the DMPS-100/200/300-C can be muted with the MUTE button.
• To mute the audio output, press the button labeled MUTE.
• To unmute the audio output, press the MUTE button again.