Specifications

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
1
Affordable, high-performance presentation control without
programming (DMPS-100-C)
High definition multimedia system switcher, mic mixer, audio DSP,
amplifier, and control system
Integrated DigitalMedia switcher featuring DM 8G+technology
HDBaseT Certified enables direct connection to third-party HDBaseT
devices
Matrix signal routing for up to four sources and one display
(DMPS-100-C), six sources and two displays (DMPS-200-C), or seven
simultaneous sources and four displays (DMPS-300-C and
DMPS-300-C-AEC)
Handles HDMI
®
, DVI, DisplayPort Multimode, and S/PDIF digital
sources
Handles RGB, composite, S-video, component, and stereo audio analog
sources
DigitalMedia Presentation Systems:
DMPS-100-C/DMPS-200-C/DMPS-300-C/
DMPS-300-C-AEC
Introduction
The DMPS-100-C, DMPS-200-C, DMPS-300-C, and DMPS-300-C-AEC systems
from Crestron
®
are complete, high-definition presentation control and signal routing
solutions for classrooms, boardrooms, lecture halls, and videoconference rooms.
Integrating the control system, multimedia matrix switcher, mic mixer with AEC
(DMPS-300-C-AEC only), audio DSP, and amplifier all into one 3-space rack mount
package, the systems afford extensive signal routing flexibility and
high-performance signal processing without the need for separate components.
Auto-configuring inputs enable plug-and-play compatibility with a wide range of
digital and analog sources. Built-in DigitalMedia™ and HDBaseT
®
connectivity
affords a streamlined wiring solution for interfacing with remote AV sources,
computers, and display devices.
The DMPS-300-C-AEC is an enhanced version of the DMPS-300-C featuring
full-bandwidth acoustic echo cancellation on each of its six mic inputs. It integrates
directly with up to two audio or video codecs for a total teleconferencing system
solution.
For simplicity within this guide, the term “DMPS-100/200/300-C” is used except
where noted.
Features and Functions
(Continued on following page)