Specifications

ManualsBrandsCrestron ManualsProjectorDMPS-300-C-AEC

Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System

Operations Guide – DOC. 7219E DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC

•

No Programming Required (DMPS-100-C Only)

Installing the DMPS-100-C is easy, fast, and affordable. There is no programming

required to deliver a fully-functional presentation system–just select the input sources

and display device, add lighting control and other features, and the job is done.

Configuring and controlling the complete system is enabled using the

TSW-750-B PAK 7” tabletop touch screen.

DMPS and AirMedia Packages (DMPS-100-C Only)

Crestron DMPS-AIRMEDIA PAK packages deliver maximum value and

performance for classrooms and other presentation spaces. The

DMPS-AIRMEDIA-1 PAK includes the DMPS-100-C along with the AM-100

AirMedia™ Presentation Gateway. AirMedia lets anyone walk into the room and

wirelessly present from their iOS

or Android device, or their MacBook

or PC

laptop. The DMPS-AIRMEDIA-2 PAK adds a DM 8G+ Receiver and Scaler for easy

one-wire signal routing to the display. The DMPS-AIRMEDIA-3 PAK includes the

DM 8G+ Receiver and Scaler, and adds a DM 8G+ transmitter and receiver to enable

one-wire signal routing from remote sources located at a podium or table. Touch

screen configuration and control can be added to any package using the

TSW-750-B PAK 7” tabletop touch screen.

HD System Switcher

The DMPS-100/200/300-C provides high-performance routing of numerous digital

and analog sources to up to four separate projectors, flat panel displays, codecs, touch

screens, and other devices. Connectivity is provided for multiple HDMI sources

other combinations of HDMI, RGB, S/PDIF, analog audio, and analog video sources

(plus additional remote sources via DM 8G+). Input auto-detection and auto-

switching eliminates the need to configure the inputs—simply connect the source and

the DMPS-100/200/300-C selects the right audio and video combination. Depending

on the DMPS device being used, built-in matrix switching allows routing of up to

seven simultaneous sources to up to four HDMI or DVI display devices, plus up to

three additional analog audio components.

Flexible Audio Routing

The HDMI, S/PDIF, and analog audio inputs may be configured to follow their

associated video inputs, or switched independently. In fact, the audio from any HDMI

source can be extracted from the digital stream and converted to analog to feed an

outboard processor, mixer, or codec, with the return signal feeding back through any

analog input, which can be embedded with any video source to form a new HDMI

output. Routing of multichannel PCM, Dolby, and DTS audio sources is supported

through the HDMI and DM 8G+ outputs. All analog audio, HDMI, DM, and S/PDIF

inputs include adjustable input compensation to accommodate a wide range of signals

and maintain consistent volume levels when switching between sources.

DigitalMedia 8G+

Integrated DigitalMedia DM 8G+ inputs and outputs afford the ultimate in simplicity,

providing a true one-wire interface for remote sources and display devices. Easily add

up to two DM 8G+ transmitters to provide connectivity for HD AV sources and

computers at a table or lectern. Connect two DM 8G+ receivers (with the DMPS-300-

C) to provide independent signal routing and control for two separate projectors or flat

panel displays.

1. Item(s) sold separately.

2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort

Multimode signal. CBL-HD-DVI interface cables available separately.