Specifications
DMPS-300-C DigitalMedia
™
Presentation System 300
crestron.com
|
800.237.2041
DM OUTPUT 3 – 4 (rear): (4) LEDs, green LEDs indicate DM link status,
amber LEDs indicate video and HDCP signal presence, for each respective
port
DM OUTPUT 3 – 4 PoDM (rear): (2) green LEDs, indicate downstream
device is drawing power over DM for each respective port
LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and
activity, green LED (right) indicates Ethernet link status
Power Requirements
Main Power: 4 Amps @ 100-240 Volts AC, 50/60 Hz
Available Cresnet Power: 30 Watts
Power over DM (PoDM): PoDM PSE (Power Sourcing Equipment), supplies
power to PoDM Powered Devices
[3]
Power over HDBaseT (PoH): PoH PSE (Power Sourcing Equipment),
supplies power to PoH Powered Devices
[3]
PoDM Power Pack: 1.875 Amp @ 48 Volts (100-240 Volts AC, 50/60 Hz
power pack, model PW-4818DU sold separately)
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 277 BTU/hr
Enclosure
Chassis: Metal, black finish, fan-cooled, vented sides
Front Panel: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding or 3U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
Height: 5.20 in (133 mm) without feet
Width: 17.28 in (439 mm);
19.00 in (483 mm) with rack ears
Depth: 16.31 in (415 mm)
Weight
22 lb (9.9 kg)
MODELS & ACCESSORIES
Available Models
DMPS-300-C: DigitalMedia
™
Presentation System 300
Available Accessories
AM-100: AirMedia
™
Presentation Gateway
PW-4818DU: 90W PoDM Power Pack for DMPS
HD-TX3-C: HDMI
®
over HDBaseT
®
Transmitter
DM-TX-200-C-2G: Wall Plate DigitalMedia 8G+
™
Transmitter 200
DM-TX-201-C: DigitalMedia 8G+
™
Transmitter 201
DM-TX-401-C: DigitalMedia 8G+
™
Transmitter 401
HD-SCALER: High-Definition Video Scaler
HD-RX3-C: HDMI
®
over HDBaseT
®
Receiver
DM-RMC-SCALER-C: DigitalMedia 8G+
™
Receiver & Room Controller
w/Scaler
DM-RMC-100-C: DigitalMedia 8G+
™
Receiver & Room Controller 100
DM-RMC-200-C: DigitalMedia 8G+
™
Receiver & Room Controller 200
AMP-2210S: 2x210W Commercial Power Amplifier, 4/8Ω
AMP-3210S: 3x210W Commercial Power Amplifier, 4/8Ω
AMP-2210T: 2x210W Commercial Power Amplifier, 4/8Ω or 70/100V
AMP-3210T: 3x210W Commercial Power Amplifier, 4/8Ω or 70/100V
AMP-2210HT: 2x210W Commercial Power Amplifier, 4/8Ω or
High-Power 70V
Crestron
®
App: Control App for Apple
®
iOS
®
Crestron Mobile Pro
®
: Control App for iPhone
®
, iPad
®
and Android
™
Devices
Crestron
®
App for Samsung Smart TV
®
: Control App for Samsung
Smart TV
XPanel: Crestron Control
®
for Computers
Fusion EM
®
: Energy Management Software
Fusion RV
®
: Remote Asset Management Software
RoomView
®
Express: Remote Help Desk and Resource Management
Software
CSP-LIR-USB: IR Learner
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
CNXRMIRD: IR Receiver
DM-CBL-8G-NP: DigitalMedia 8G
™
Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G
™
Cable, plenum
DM-8G-CONN: DigitalMedia 8G
™
Cable Connector
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
DM-8G-CONN-WG: DigitalMedia 8G
™
Cable Connector with Wire Guide
DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG
CRESNET-NP: Cresnet
®
Control Cable, non-plenum
CRESNET-P: Cresnet
®
Control Cable, plenum
CRESNET-HP-NP: Cresnet
®
“High-Power” Control Cable, non-plenum
CBL Series: Crestron
®
Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
USB-EXT-DM: USB Extenders
Notes:
1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI interface cables available separately.
2. For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron
DM-CBL DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or third-party CAT5e
(or better) UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices.
Shielded cable and connectors are recommended to safeguard against unpredictable environ-
mental electrical noise which may impact performance at resolutions above 1080p. Refer to
the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines.
DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT
compliant equipment. All wire and cables sold separately.
3. Supplying Power over DM (PoDM) or Power over HDBaseT (PoH) requires external power pack,
model PW-4818DU, sold separately.
4. Item(s) sold separately.
5. The RGB inputs can accept component, composite, and S-Video signals via direct interface
to Crestron MPS Series products, or through an appropriate adapter (not included). Input sync