The specific patents that cover Crestron products are listed at patents.crestron.com. Crestron, the Crestron logo, Cameo, Cresnet, Crestron Green Light, Green Light Express, iLux, infiNET EX, Instant-Waking, Isys, LiveView, RoomView, SIMPL+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Excel is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries.
Crestron Commercial Lighting Design Guide Table of Contents Introduction.............................................................................................................................. 1 Specifying Crestron Lighting Systems .................................................................................. 1 System Architecture .............................................................................................................................................
Crestron Commercial Lighting Design Guide Sensors .................................................................................................................................. 59 The Sensor Advantage .................................................................................................................................... 59 Automated Actions ...........................................................................................................................................
Crestron Commercial Lighting Design Guide Introduction This guide is designed to educate you on lighting system design using the ® wide range of products found in the Crestron Green Light family. Crestron Green Light is built on 40 years of expertise, vision, and innovation. From the very first touch panel to the first Ethernet-based control system, ® Crestron has defined “integration.
Crestron Commercial Lighting Design Guide System Architecture Crestron Green Light systems are available in a variety of configurations. Factors such as construction type, client requirements, and architectural restrictions determine the best configuration. Lighting system architectures include centralized, distributed, and hybrid. At the heart of each Green Light system is one or more control processors.
Crestron Commercial Lighting Design Guide Doc. 4775B | Crestron.
Crestron Commercial Lighting Design Guide Distributed Architecture Product Families: Room Solutions • • • Wired in traditional configuration Each load is controlled by a local Crestron device. In some cases, the local device has integrated on-board keypad Keypad and touch screen control are optional, allowing that load to be controlled from any location In a distributed system the high-voltage lighting, motor, fan, and switch circuits are wired in the traditional configuration with local control.
Crestron Commercial Lighting Design Guide Doc. 4775B | Crestron.
Crestron Commercial Lighting Design Guide Product Families Crestron has developed a number of Green Light products to suite the broad range of applications in the world of commercial lighting. Architectural Dimming: Centralized dimming and switching, 16 amp per circuit, and support for a wide range of loads. Built-in, pre-wired circuit breakers are optional. Power Switching: Centralized switching, 16A per circuit, and support for 0-10 volt dimming. All models include pre-wired circuit breakers.
Crestron Commercial Lighting Design Guide Written Specifications Comprehensive Section 26 specifications are available for download on the Crestron website. These specifications can be implemented within lighting project specifications to ensure bids meet the appropriate requirements as set by Crestron. Specifications are located at www.crestron.
Crestron Commercial Lighting Design Guide Lighting Systems Architectural Dimming Crestron Green Light Architectural Dimming products are designed for control of lighting in theaters, restaurants, offices, and anywhere centralized dimming is desired. With a range of panel sizes and configurations available, every system is fully scalable to custom-fit each installation.
Crestron Commercial Lighting Design Guide Example Architectural Dimming Application Below is an example Architectural Dimming panel application. Lighting is directly controlled through the AC wiring ® coming out of the panel. The panel connects to a PAC2 processor via Cresnet . Also connected to the PAC2 are C2N shade contorollers, a photocell, a motion sensor, a keypad, and a touch screen. Everything can be controlled ® and monitored from the connected PC by using RoomView . Doc. 4775B | Crestron.
Crestron Commercial Lighting Design Guide GLPD Panels Crestron GLPD Architectural Dimming panels can dim a wide range of lighting types. There are many configurations available for any budget or need. This text describes how to design your suitable panel configuration and how to name it for ordering. GLPD Panel Naming System GLPD - Module Type DIM - Feed Type - MLO MCB60 MCB80 MCB100 MCB125 Number of Loads - Voltage 1 2 3 ...
Crestron Commercial Lighting Design Guide 3. Number of Loads GLPD-DIM-___-___-___-___ Maximum # of Loads Find the row in the table that matches your choices in steps 1 and 2. The numbers in blue represent the maximum number of loads for each cabinet size. You can choose any number up to the maximums listed below. See page 18 for more information on the cabinet sizes.
Crestron Commercial Lighting Design Guide GLPD-C Panels For architectural dimming panels with mixed module types, a “C” is attached to the model name (denoting custom). The number of each module type is specified within the product name.
Crestron Commercial Lighting Design Guide 2. Number of DIM, FLV, and HSW GLPD-C-___-___-___-___-___-___ In the table below are the possible module choices. To design the cabinet, select quantities of these three modules. A DIM module wires 6 loads, an FLV module wires 8 loads, and an HSW module wires 8 loads.
Crestron Commercial Lighting Design Guide 3. Voltage GLPD-C-___-___-___-___-___-___ To specify the circuit breaker voltage, enter “120” for 120/208V or “277” for 277/480V. Note: For feed-thru cabinets only (-FT), the model name is complete after step two. Skip steps three and four. 4. AIC Rating GLPD-C-___-___-___-___-___-___ Choose one of the following values from the appropriate column to specify the Ampere Interrupting Capacity of the circuit breakers.
Crestron Commercial Lighting Design Guide Module Specifications GLX-DIM6 The GLX-DIM6 is a Crestron Green Light architectural dimming module which features 6 channels of incandescent, magnetic low-voltage, and 2- and 3-wire fluorescent dimming. The module is part of a complete Crestron engineered GLPD Green Light architectural dimming panel.
Crestron Commercial Lighting Design Guide GLX-DIMFLV8 The GLX-DIMFLV8 is a Crestron Green Light architectural dimming module which features 8 channels of 4-wire, 0-10 Volt fluorescent dimming. The module is part of a complete Crestron engineered GLPD Green Light dimming panel.
Crestron Commercial Lighting Design Guide GLX-HSW8 The GLX-HSW8 is a Crestron Green Light architectural dimming module which features 8 channels of high inrush switching. The module is part of a complete Crestron engineered GLPD Green Light dimming panel.
Crestron Commercial Lighting Design Guide Cabinets Regular cabinets have built-in circuit breakers. The cabinets are shipped with wiring from the breakers to the modules completed for easy installation. Feed-thru cabinets require a separate breaker panel next to the GLPD panel. Cabinet Sizes Height Width Depth 2x2 3x2 2x4 3x4 67.8 in (172.3 cm) 22.8 in (58.1 cm) 10.6 in (27 cm) 96.0 in (243.8 cm) 22.8 in (58.1 cm) 10.6 in (27 cm) 67.8 in (172.3 cm) 35.1 in (89.1 cm) 10.6 in (27 cm) 89.9 in (228.
Crestron Commercial Lighting Design Guide Power Switching Crestron Green Light Power Switching products are designed for control of lighting in office buildings, warehouses, parking garages, sports facilities, public spaces, and anywhere centralized switching is required. With a range of panel sizes and configurations available, every system is fully scalable to custom-fit each installation.
Crestron Commercial Lighting Design Guide Example Power Switching Application Below is an example power switching application with backup power operation using a GLS-PLS phase loss sensor (see accessories section for more details). The power switching panels connect to an IPAC-GL1 processor via Cresnet. Connected to the processor are various sensors, a keypad, and a photocell. It is possible to add up to two touch screens to the IPAC-GL1 as well. Connected via a LAN is a PC running RoomView.
Crestron Commercial Lighting Design Guide GLPS Panels Crestron GLPS Series power switching panels feature field-replaceable switching modules with a choice of relay technologies to address a wide range of applications and budgets. In addition to switching, some Green Light Power Switching panels also allow the option to add dimming control for 0-10V fluorescent ballasts and 0-10V LEDs. Switching relays are available in arcless or standard form.
Crestron Commercial Lighting Design Guide 3. Number of Loads GLPS-___-___-___-___-___-___ Maximum # of Loads Find the row in the table that matches your choices in steps 1 and 2. The numbers in blue represent the maximum number of loads for each cabinet size. Choose a cabinet size, and do not exceed the maximums when designing the panel. See page 28 for more information on the cabinet sizes.
Crestron Commercial Lighting Design Guide GLPS-C Panels For power switching panels with mixed module types, a “C” is attached to the model name (denoting custom). The quantity of each module type is specified within the product name.
Crestron Commercial Lighting Design Guide Find the row in the table that matches your choice in step 1. In that row is the maximum number of loads for each cabinet size. Choose a cabinet size, and do not exceed the maximums when designing the panel. See page 28 for more information on the cabinet sizes. Medium 8 Cabinets Large 8 Extra Large MLO 30 42 42 MCB 27* 39* 39* Maximum # of Loads Max Combined Size 11 *If using 120/208V and 125A MCB, reduce the maximum number of loads shown by three.
Crestron Commercial Lighting Design Guide Module Specifications GLXP-SW10 and GLXP-SW16 The GLXP-SW10 and GLXP-SW16 are Crestron Green Light switching modules which feature 10 or 16 channels of power switching with rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel.
Crestron Commercial Lighting Design Guide GLXP-HSW8 and GLXP-HSW12 The GLXP-HSW8 and GLXP-HSW12 are Crestron Green Light switching modules which features 8 or 12 channels of high-inrush power switching with rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel.
Crestron Commercial Lighting Design Guide GLXP-DIMFLV8 The GLXP-DIMFLV8 is a Crestron Green Light switching module which features 8 channels of 4-wire, 0-10 Volt fluorescent dimming. The module is part of a complete Crestron engineered GLPS Green Light switching panel.
Crestron Commercial Lighting Design Guide Cabinets The spaces for the modules are shown by rectangles below. Remember, each module takes up either two or three “spaces”. The cabinets are depicted with 120 volt breakers. Cabinet Sizes Medium Large Extra Large Max Number of Circuits 30 42 42 Max Combined Module Size 8 8 11 70 in (177.8 cm) 20 1/4 in (51.4 cm) 6 5/8 in (16.8 cm) 78 15/16 in (200.5 cm) 20 1/4 in (51.4 cm) 6 5/8 in (16.8 cm) 90 in (228.6 cm) 20 1/4 in (51.4 cm) 6 5/8 in (16.
Crestron Commercial Lighting Design Guide Green Light Express For installations using a separate branch-circuit breaker panel, Crestron offers the Green Light Express series of "feed-thru" panels. Like their "main-lug" panel counterparts, the GLPX panels feature zero-cross arcless switching and standard switching.
Crestron Commercial Lighting Design Guide GLPX Panels GLPX Model Naming System Crestron GLPX panels are configurable for dimming or switching and come equipped with Green Light Express modules. GLPX When specifying and ordering a GLPX panel, construct a model name as shown to the right. Possible choices are listed underneath each blue box. The numbered steps below describe each choice in detail. Examples: - Module Type SW HSW - Number of Loads 1 2 3 ...
Crestron Commercial Lighting Design Guide Module Specifications for GLXX-SW8 and GLXX-SW16 The GLXX-SW8 and GLXX-SW16 are Crestron Green Light Express switching modules which feature 8 or 16 channels of power switching with rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPX Green Light Express panel.
Crestron Commercial Lighting Design Guide GLXP-HSW8-LP and GLXP-HSW12-LP The GLXP-HSW8-LP and GLXP-HSW12-LP are Crestron Green Light switching modules which feature 8 or 12 channels of high-inrush power switching with rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel.
Crestron Commercial Lighting Design Guide GLXX-HDSW8 and GLXX-HDSW16 The HDSW8 and HDSW16 are Crestron Green Light Express modules that hold GLR-HD-1P and GLR-HD-2P relays. The HDSW8 holds up to (8) GLR-HD-1P or (4) GLR-HD-2P relays. The HDSW16 holds up to (16) GLR-HD-1P or (8) GLR-HD-2P relays. GLR-HD-1P Load Ratings Switch Channels General Use Tungsten Electric Discharge Lamp Motor Loads Load Types Single-pole single-throw latching relay 20 amps, 347 Vac 2400 watts, 120 Vac 20 amps, 347 Vac 0.
Crestron Commercial Lighting Design Guide GLXP-DIMFLV8-LP The GLXP-DIMFLV8-LP is a Crestron Green Light architectural dimming module which features 8 channels of 4-wire, 0-10 Volt fluorescent dimming. The module is part of a complete Crestron engineered GLPD Green Light dimming panel.
Crestron Commercial Lighting Design Guide GLXX-2DIM8 The GLXX-2DIM8 is a Crestron Green Light Express dimming module which features 8 channels of incandescent, magnetic low-voltage, and 2- and 3-wire fluorescent dimming. The module is part of a complete Crestron engineered GLPX Green Light Express dimming or switching panel.
Crestron Commercial Lighting Design Guide DALI The Digital Addressable Lighting Interface (DALI) is a protocol used for the direct control of lighting ballasts. A DALI controller communicates bi-directionally with up to 64 individual DALI ballasts over a low-voltage 2-wire bus, providing fixture-level control. Because each fixture can be controlled individually, DALI systems afford the ability to easily configure and reconfigure spaces.
Crestron Commercial Lighting Design Guide DIN-DALI-2 The DIN-DALI-2 is a DALI interface for Crestron systems providing control of up to two individual DALI loops. Housed in a DIN-rail enclosure, the DIN-DALI-2 is a great low-profile Cresnet or Ethernet companion to the DINAP2 processor, or any 2-Series control system. In addition to controlling the DALI data bus, it includes an integrated DALI power supply.
Crestron Commercial Lighting Design Guide DIN-2MC2 The DIN-2MC2 is a 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates. Each channel supports up/down or open/close control of a conventional 3-wire bidirectional type motor up to ½ HP. Built-in timing and interlock logic make it easy to program the DIN-2MC2 for failsafe operation.
Crestron Commercial Lighting Design Guide Versiport Configured as a digital input, the Versiport senses a contact closure or logic level signal from devices such as motion detectors, partition sensors, alarm panels, 12V triggers, and all types of switches and relays. As an analog input, the Versiport can sense changes in a resistance or DC voltage level, working with everything from temperature and light sensors to water level meters to volume control potentiometers.
Crestron Commercial Lighting Design Guide DIN-PWS50 The DIN-PWS50 is a 50 watt Cresnet power supply module designed to snap onto a standard DIN Rail installation. DIN Rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other thirdparty DIN Rail mountable devices. All wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing.
Crestron Commercial Lighting Design Guide Room Solutions Room Solutions are used to control lighting, motors, and other loads in a room or small group of rooms. The lighting controllers are integrated with “internal intelligence” resulting in a complete package that can be wall mounted or hidden out of sight. Dimming is available for a wide variety of lighting types. With Room Solutions, standard wall dimmers and switches are replaced with powerful local control.
Crestron Commercial Lighting Design Guide Products GLPAC-DIMFLV4(-PM) and GLPAC-DIMFLV8(-PM) The GLPAC-DIMFLV family is a Crestron Green Light integrated lighting system, designed for use as a standalone lighting controller in classrooms, conference rooms, and even across multiple offices. While able to control 4 or 8 channels of dimmable fluorescent loads, each GLPAC also provides a link to a centralized Crestron lighting control system for control and monitoring.
Crestron Commercial Lighting Design Guide iLux iLux Room Controller (CLS-C6M) iLux is a complete, integrated lighting system designed for wall mount installation in boardrooms, auditoriums, theaters, or anywhere versatile and cost-effective control of lighting and shades is required. iLux CLS-C6 is available with different options, including infiNET EX wireless communications and motion detection.
Crestron Commercial Lighting Design Guide iLux Room Controllers CLS-C6 iLux CLS-C6M iLux w/ Motion Detector CLSiLux w/ infiNET EX C6EX CLSiLux w/ Motion Detector C6MEX andinfiNET EX CLSI-C6 CLSI-C6M CLSI-C6EX iLux – International (230 V) iLux w/ Motion Detector – International (230 V) iLux w/ infiNET EX – International (230 V) CLSIC6MEX iLux w/ Motion Detector & infiNET EX – International (230 V) Control System Integration via infiNET EX iLux Room Controllers with Crestron’s infiNET EX technology can
Crestron Commercial Lighting Design Guide Expansion Modules Expansion modules increase the amount of lighting loads controllable by a single CLS-C6 type unit. See the example above.
Crestron Commercial Lighting Design Guide Cameo Dimmers and Switches ® Cameo dimmers and switches are designed to replace any standard in-wall dimmer or switch. Although the following devices are functional as a standalone dimmer or switch, they deliver greatly enhanced functionality as part of a complete Crestron control solution. When connected to a Crestron PAC2 or PAC2M automation control system (or any other 2Series control system), extensive automation and control capability is enabled.
Crestron Commercial Lighting Design Guide Processors PAC2 The PAC2 is a professional dual bus control system designed to serve as the central processor for Crestron Green Light systems. Fast performance, rigorous construction, and extreme flexibility provide a truly powerful automation solution for today's most demanding commercial environments. The PAC2 is extensively programmable using the Crestron suite of development software.
Crestron Commercial Lighting Design Guide PAC2M The PAC2M is a compact, low-cost alternative to the PAC2 designed for small lighting and automation applications. At half the size of a PAC2, the PAC2M is perfect for individual meeting rooms and lecture halls. The PAC2M is extensively programmable using Crestron’s suite of development software.
Crestron Commercial Lighting Design Guide IPAC-GL1 The Crestron IPAC is a 2-Series control processor designed for wall mount installation. Its front panel controls and LCD display deliver a user-friendly interface for out-of-the-box system setup. Built-in Ethernet, Cresnet, RS232, relay, and sensor inputs provide direct connectivity for interfacing with all kinds of devices, controls, and networks.
Crestron Commercial Lighting Design Guide DIN-AP2 The DIN-AP2 is a 2-Series control processor designed for small to medium-sized lighting and automation applications. DIN rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN rail mountable devices.
Crestron Commercial Lighting Design Guide User Interfaces Crestron has an unparalleled selection of user interfaces, from touch screens to keypads to PCs. Listed here are select products that work well in commercial lighting installations. Other user interfaces are available and can be found at www.crestron.com. Keypads are a simple and cost effective interface for classrooms and small offices.
Crestron Commercial Lighting Design Guide TPS-6 and TPS-6L • TPS-6: 45 degree tilt mount for tabletop use • TPS-6L: flush mount for in a wall, lectern, or similar flat surface • 5.
Crestron Commercial Lighting Design Guide V12 and V15 • • • • • • • • • • • • • • • • • Available in tabletop or flush mount V12: 12" touchscreen display, 800 x 600 SVGA resolution V15: 15” touchscreen display, 1280 x 768 WXGA resolution Sleek, beautiful, versatile High-performance graphics and video Industry's only HDCP-ready touch screen controller VESA-compatible mounting affords endless install options Tabletop tilt model features clean, modern design Wall mount model installs flush in shallow spaces
Crestron Commercial Lighting Design Guide TPS-6X • • • • • • • • • • • • • • • • • Lightweight contoured design for wireless handheld use Also affords full-featured tabletop tilt touch screen operation Elegant high gloss black or white, or matte black finishes Non-slip rubber grips on rear Illuminated buttons and engravable backlit text 5.
Crestron Commercial Lighting Design Guide Keypads Cameo Crestron Cameo presents a fresh, innovative concept in keypad design featuring an incredibly small footprint and slim profile with versatile button configurations. Use Cameo keypads as a simple interface for controlling lights, shades, motors, or even an A/V system connected to the control system.
Crestron Commercial Lighting Design Guide Decorator Crestron C2N-DB Decorator Series keypads deliver versatile keypad control with contemporary styling to support a broad range of applications from lighting to AV distribution. Decorator keypads are available in several configurations. Decorator keypads are designed to allow installation in perfect harmony with non-Crestron devices using readily available decorator style faceplates (not included).
Crestron Commercial Lighting Design Guide Designer The CNX-B Designer series wall mount keypads are available in configurations of 2, 4, 8, or 12 buttons. Buttons are large for optimal ergonomics. Each model mounts in a standard electrical gang box and includes a matching 1-gang faceplate. Optional 2 and 3-gang faceplates are available to allow up to three keypads to be installed sideby-side. Optional Designer and Architectural faceplates are offered in a variety of elegant finishes.
Crestron Commercial Lighting Design Guide HTT-B10EX The HTT-B10EX is a stylish compact wireless pushbutton controller with 10 multi-function buttons, custom backlit engraving, white LED feedback, and infiNET EX wireless technology. Perfect for desktops, podiums, or anywhere else a simple, unobtrusive controller is needed without running any wires.
Crestron Commercial Lighting Design Guide Sensors Adding sensors makes a smart system even smarter. Sensors save on energy costs while enhancing functionality and reliability. The Sensor Advantage • • • Reduced energy usage More consistent lighting levels Completely automatic Automated Actions A system with sensors will automatically control lights based on occupancy. When no one is in a room, lights shut off and energy is conserved. Sensors also help with light harvesting by monitoring ambient light.
Crestron Commercial Lighting Design Guide GLS-LOL and GLS-LCL GLS-LCL LS-LOL Crestron Photocell Light Sensors are designed for daylight harvesting applications to control the balance of natural and artificial lighting in an indoor space. By harnessing natural daylight from windows and skylights, electrical lighting can be turned off or dimmed, reducing energy usage while maintaining a consistent light level for a more efficient and comfortable work space.
Crestron Commercial Lighting Design Guide Shades Shade and drape controllers are available to provide a convenient and cost-effective solution for harvesting natural light and controlling the effects of the sun within an environment. By integrating shade and drape control into a Crestron system, natural light can be used to help lower energy costs. In the colder months; shades can raise automatically to use sunlight as a supplemental heating source.
Crestron Commercial Lighting Design Guide 2-Gang Installation C2N-SSC-2 The C2N-SSC-2 Somfy Shade Controller is a compact Cresnet device designed to provide a bidirectional serial interface for up to two Somfy ILT Intelligent Shade Motors (http://www.somfy.com/nam/index.cfm). Window treatments equipped with the Somfy ILT motor offer enhanced capability compared to typical 3-wire models.
Crestron Commercial Lighting Design Guide Accessories GLS-PLS The GLS-PLS is a 3-phase power loss sensor designed for use with Crestron Green Light systems to activate Override mode during a power failure. In response to a signal from the GLS-PLS, the lighting system program can be temporarily overridden while designated emergency lighting circuits are changed to their override preset levels and unnecessary lighting and other devices are shut down to minimize the demand on emergency power equipment.
Crestron Commercial Lighting Design Guide GLA-DMX512 GLA-DMX512 is a complete lighting playback and integration processor, featuring advanced DMX lighting control, sophisticated event scripting and robust I/O capabilities. Great for both architectural and entertainment lighting control projects. GLA-DMX512 is entirely web-based, which means that no special software is needed to operate or program GLA-DMX512. Use a web browser on your computer or PDA to connect to GLA-DMX512 to begin working with it.
Crestron Commercial Lighting Design Guide RoomView Green Light Integrated Energy Management Software RoomView Green Light is a complete energy management program for an organization of any size. From a school to a whole enterprise, RoomView Green Light will keep track of your carbon footprint while informing you of trends, usage, and ways to save money. RoomView Green Light will monitor every light, shade, and HVAC system independently.
Crestron Commercial Lighting Design Guide Sample Screen Shots Above is a LiveView window showing the total energy usage for a building over one day. The green portion of the graph represents energy produced by an on-site renewable energy source. The gray area is energy provided by the power grid, natural gas or other sources. Energy use is broken down by area, usage type, and energy source type in the pie charts. Above is an example report (in the PDF standard).
Crestron Commercial Lighting Design Guide Touch Screen Graphics Doc. 4775B | Crestron.
Crestron Commercial Lighting Design Guide 68 Doc. 4775B | Crestron.
Crestron Commercial Lighting Design Guide This page intentionally left blank Doc. 4775B | Crestron.
Crestron Commercial Lighting Design Guide Crestron World Headquarters 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 crestron.com Refer to the listing of Crestron worldwide offices on the Crestron Web site (www.crestron.com/offices) for assistance within a particular geographic region.