Setup guide

Crestron IPAC-GL1 Integrated Professional Automation Computer
Sensors
Use the “Sensor Location Worksheet” in the IPAC-GL1 System Planning
Worksheets (included with your IPAC) to identify sensors and their functions. After
all of the sensors have been identified, use this section of the Setup Menu to
configure the sensor functionality of the IPAC system.
The IPAC uses input from a sensor device connected to input 1 of the INPUTS port
in addition to 80 additional sensors connected to DIN-IO8 DIN Rail Versiport
Modules and GLS-SIM Sensor Integration Modules.
Input 1 on the INPUTS port is configured to connect to a GLS sensor. The sensor
input can be configured as a normally open sensor (N/O) a normally closed sensor
(N/C), active high (Active Hi), or active low (Active Lo). For more information,
refer to “Test Sensors” on page 42.
Open Sensors
To open the Sensors section of the Setup Menu:
1. From the home page, press the soft button labeled Setup.
2. Turn the selection knob to highlight Sensors.
3. Press ENTER or the soft button labeled Select to open the Sensors section
of the Setup Menu.
Sensor List
Loads Test Exit
Int. Online
C0.1/2 Not Found
C1.1/2 Online
C2.1/2 Not Found
Sensr
List
SelectLoads
A list of sensors are displayed. Turn the selection knob to scroll through the
list of sensors. Each line lists the sensor ID and its status.
The device listed on the display as Int. denotes a sensor device that is
connected to input 1 on the INPUTS port of the IPAC. For more
information on the INPUTS port, refer to the latest version of the IPAC
Installation Guide (Doc. 6696) which is available for download from the
Crestron website.
The list also shows up to 40 GLS-series sensors connected via 20 GLS-SIM
Sensor Integration Modules and 40 GLS-series sensors connected via five
DIN-IO8 DIN Rail Versiport modules. Sensors are identified by their
network identification code (Net ID). For example:
⇒ Device D4.2 represents a sensor connected to port 2 on a DIN-IO8 with
Net ID D4.
Setup Guide – DOC. 6660B Integrated Professional Automation Computer: IPAC-GL1 • 39