Crestron HBK-3000 & SMK-3000 Hatchback and Swivel Mount Kits Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2002 Crestron Electronics, Inc.
Crestron HBK-3000 & SMK-3000 Hatch Back & Swivel Mount Kits Contents Hatchback & Swivel Mount Kits: HBK-3000 & SMK-3000 1 Description .......................................................................................1 Supplied Hardware...........................................................................2 Installation........................................................................................2 HBK-3000 Assembly/Installation Procedure ........................
Crestron HBK-3000 & SMK-3000 Hatch Back & Swivel Mount Kits Hatchback & Swivel Mount Kits: HBK-3000 & SMK-3000 Description The Hatchback and Swivel Mount Kits, HBK-3000 and SMK-3000 (each sold separately), are designed for attachment to the Crestron TPS-3000 tilt touchpanels. The HBK-3000 hatchback is a sleekly designed rear-cover option that provides cable management, wire strain relief, and prevents unauthorized users from disconnecting the touchpanel.
Hatch Back & Swivel Mount Kits Crestron HBK-3000 & SMK-3000 Supplied Hardware The hardware supplied in the kits is listed in the following table.
Crestron HBK-3000 & SMK-3000 Hatch Back & Swivel Mount Kits HBK-3000 Assembly View SMK-3000 Assembly/Installation Procedure To attach the SMK-3000 Swivel Mount Kit to the TPS-3000 Touchpanel and install the assembly on a suitable mounting surface, refer to the following procedures and the illustration on page 5. 1. Prepare the mounting surface using the template provided with the kit. The center hole for the swivel assembly should be 2.5-inches minimum; 2.6-inches maximum.
Hatch Back & Swivel Mount Kits Crestron HBK-3000 & SMK-3000 5. Put the Metal Bracket in position on the rear of the touchpanel base (mounting holes should align, and standoff posts should be oriented as shown in the illustration). Secure the Metal Bracket to the touchpanel using the two screws A removed in step 4. 6.
Crestron HBK-3000 & SMK-3000 Hatch Back & Swivel Mount Kits SMK-3000 Swivel Mount Kit Assembly Diagram Mounting Holes (2) A To Touchpanel Mounting B Holes (4) Bottom of Touchpanel Route Cables Through This Opening Swivel Assembly C D E F Mounting Surface FRONT Metal Plate G From Interface Box Installation Guide – DOC.
Hatch Back & Swivel Mount Kits Crestron HBK-3000 & SMK-3000 Further Inquiries If after reviewing this Installation Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Crestron HBK-3000 & SMK-3000 Hatch Back & Swivel Mount Kits Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 6110 10.02 Specifications subject to change without notice.
