Installation guide

7.1 High-Definition Professional Surround Processor Crestron HD-XSP
18 7.1 High-Definition Surround Processor: HD-XSP Operations & Installation Guide DOC. 7446A
Hardware Hookup
Connect the Device
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the HD-XSP, use Crestron power supplies for Crestron
equipment.
Hardware Connections for the HD-XSP (Front)
COMPUTER:
To Computer Console
Hardware Connections for the HD-XSP (Rear)
IN OUT
HDMI
OUTPUT
LAN
INPUT
DIGITAL BALANCED
2
5 6
MIX
3
4
L
R
+ - + -G
FRONT
L
R
+ - + -G G
SURROUND
L
R
+ - + -G G
BACK
L
R
C
S
+ - + -G G
CENTER - SUB
+ - + -G G
DOWNMIX
L
R
+ - + -G G
2.0A
24V
---
G
L
R
MAC ID LABEL
SERIAL LABEL
HDMI IN:
From HDMI Source
HDMI OUT:
To HDMI Device
DIGITAL:
From Digital Audio Sources
INPUT:
From Unbalanced Analog
Audio Sources
INPUT:
From Balanced or Unbalanced
Analog Audio Source
OUTPUT:
To Amplifiers
LAN:
10BASE-T/100BASE-TX
Ethernet to Lan
24V DC, 2.0A:
From AC Power Pack
NOTE: Ensure the unit is properly grounded by connecting the chassis ground lug
to an earth ground (building steel).
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
One balanced/unbalanced audio input and four balanced/unbalanced audio outputs
are provided, utilizing 5-pin and 6-pin terminal block connectors respectively. For
connection details, refer to the following table and diagrams.
Audio Connections
SIGNAL
NAME
BALANCED
AUDIO INPUT
BALANCED
AUDIO OUTPUT
UNBALANCED
AUDIO INPUT
UNBALANCED
AUDIO OUTPUT
+ L + L + L + In Left/Subwoofer +
Out
- L - L - L – signal return,
jumper to GND
Open
G Shield/Ground Shield/Ground Ground Common ground
+ R + R + R + In Right/Subwoofer +
Out
- R - R - R – signal
return,
jumper to GND
Open