Installation guide

Crestron HD-XSP 7.1 High-Definition Professional Surround Processor
Operations & Installation Guide DOC. 7446A 7.1 High-Definition Surround Processor: HD-XSP 23
Configuration
The HD-XSP can be configured with the front panel controls or with Crestron
Toolbox. For details on using Crestron Toolbox, please refer to the Crestron Toolbox
help file. Otherwise, continue reading below.
InstallerMenu
The “Installer” menu is used to configure the HD-XSP
Open “Installer” Menu
To configure the HD-XSP using the front panel controls, the “Installer” menu must
be displayed. To open the “Installer” menu:
1. Press HOME to display the Crestron HD-XSPscreen as shown in the
following illustration.
“Crestron HD-XSP” Screen
Crestron
HD-XSP
2. Press BACK to display the “Password” screen.
“Password” Screen
Password
[0]000
3. Use the , , <, >, and SELECT buttons to enter the password.
To select a number, press or .
To move the cursor left or right, press < or >.
When the password is displayed, move the cursor to the rightmost digit and
press SELECT. The “Installermenu is displayed.
NOTE: The default password is 0000. For instructions on changing the
password, refer to “Password on page 34.