Installation guide

7.1 High-Definition Professional Surround Processor Crestron HD-XSP
32 7.1 High-Definition Surround Processor: HD-XSP Operations & Installation Guide DOC. 7446A
“Control System” Menu
Control System
IP ID
IP Address
3. Set the IP ID that identifies the HD-XSP in the Crestron Studio (or SIMPL
Windows) program:
a. Press or to highlight IP ID and press SELECT. The “IP ID” screen
is displayed.
“IP ID” Screen
IP ID
3
b. Press or to display the desired IP ID and press SELECT. The
display returns to the previous screen.
NOTE: The IP ID must match the IP ID in the Crestron Studio (or
SIMPL Windows) program.
If any changes were made, the HD-XSP reboots upon exiting the
“Installer” menu.
4. Set the master control system’s IP address:
a. Press or to highlight IP Address and press SELECT. The “Ctrl Sys
IP Address” screen is displayed.
Ctrl Sys IP Address” Screen
Ctrl Sys IP
Address
[255].255.255.0
b. Press or to set the first octet of the IP address.
c. Press < or > to move the cursor between octets (or press SELECT to
move to the next octet) to select for editing.