Installation guide
7.1 High-Definition Professional Surround Processor Crestron HD-XSP
34 • 7.1 High-Definition Surround Processor: HD-XSP Operations & Installation Guide – DOC. 7446A
Password
The password for opening the “Installer” menu can be changed. To change the
password:
1. Open the “Control” menu as described in “Configure Front Panel” on page
33.
2. Press ∧ or ∨ to highlight Password and press SELECT. The “Password”
screen is displayed.
“Password” Screen
Password
[0]000
3. Use the ∧, ∨, <, >, and SELECT buttons to enter the password.
• To select a number, press ∧ or ∨.
• To move the cursor left or right, press < or >.
When the password is displayed, move the cursor to the rightmost digit and
press SELECT to save the password. The “Control” menu is displayed.
Restore Defaults
To restore the HD-XSP to the factory default settings:
1. Open the “Control” menu as described in “Configure Front Panel” on page
33.
2. Press ∧ or ∨ to highlight Restore Defaults and press SELECT. The
“Restore Defaults” menu is displayed.
“Restore Defaults” Menu
Restore Defaults
No
Yes
3. Press ∧ or ∨ to highlight Yes and press SELECT. The “Are You Sure”
menu is displayed.
4. Press ∧ or ∨ to highlight Yes and press SELECT. The factory default
settings are restored.
5. To cancel at any point, press ∧ or ∨ to highlight No and press SELECT.