Installation guide

7.1 High-Definition Professional Surround Processor Crestron HD-XSP
40 7.1 High-Definition Surround Processor: HD-XSP Operations & Installation Guide DOC. 7446A
“DRC” Menu
DRC Level
Light
Medium
Heavy
b. Press or to highlight the desired level of DRC to be applied
and press SELECT. The display returns to the previous screen.
4. Press BACK to return to the previous screen.
Loudness
The loudness feature can be set from the “Theater” menu. To set loudness:
1. Open the “Theater” menu as described in “Theater” on page 38.
2. Press or to highlight Loudness: On or Loudness: Off and press
SELECT. The setting toggles between “On” and “Off”.
Equalizer
The HD-XSP can use a custom equalization setting that is created in Crestron
Toolbox. To set the equalization:
1. Open the “Theater” menu as described in “Theater” on page 38.
2. Press or to highlight EQ and press SELECT. The “Equalizer” screen is
displayed.
“Equalizer” Screen
Equalizer
Flat
Custom
3. Press or to highlight the desired setting and press SELECT. The
display returns to the previous screen.
NOTE: The Custom setting can only be configured with Crestron Toolbox.
Direct Mode
Direct mode is used to bypass any signal processing. To set Direct mode:
1. Open the “Theater” menu as described in “Theater” on page 38.
2. Press or to highlight Direct Mode: On or Direct Mode: Off and press
SELECT. The setting toggles between “On” and “Off”.
Downmix
The Downmix section of the “HD-XSP” menu provides controls for managing the
audio settings for the downmix output. To open the “Downmix” menu, press
or
to highlight Downmix and press SELECT. The “Downmix” menu is displayed.