User Guide

Crestron C2N-IRGW-1G IR Gateway/Receiver
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate, but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
• To incorporate the C2N-IRGW-1G into the system, drag the C2N-IRGW
from the Wireless Receivers | Wireless Receivers (IR) folder of the Device
Library and drop it in the System Views.
Locating the C2N-IRGW-1G in the Device Library
• The system tree of the control system displays the device in the appropriate
slot with a default Net ID as shown in the following illustration.
C2Net Device, Slot 9
• Additional C2N-IRGW-1G devices are assigned different Net ID numbers
as they are added.
• If necessary, double click a device to open the “Device Settings” window
and change the Net ID as shown in the following figure.
Operations & Installation Guide – DOC. 6468 IR Gateway/Receiver: C2N-IRGW-1G • 13