User Guide

Crestron C2N-SDC Shade & Drape Motor Controller

Firmware Upgrade

A firmware

upgrade

file has the

extension

.csf.

To take advantage of all the C2N-SDC features, it is important that the

unit contains the latest firmware available. Please check the Crestron

website for the latest version of firmware. Not every product has a

firmware upgrade, but as Crestron improves functions, adds new features,

and extends the capabilities of its products, firmware upgrades are

posted. To upgrade the firmware, complete the following steps.

NOTE: Viewport versions 3.80 or later have "Load Network Device

(Legacy)..." and "Update Network Device Firmware..." options. Either

will work with firmware version 3.05 but Crestron suggests using

"Update Network Device Firmware..." to load firmware updates.

1. Make sure that “Communication Settings,” which begins on

page 27, has been performed.

2. As shown after this step, select File Transfer | Load Network

Device… from the Viewport menu bar.

File Transfer | Load Network Device… Command

3. As shown in the “Select Network ID” window, select the Net

ID of the C2N-SDC, and then click OK. The “Open” window

appears (refer to the following graphics).

Operations & Installation Guide - DOC. 6316 Shade & Drape Motor Controller: C2N-SDC •