User Guide

ILT Shade Controller Crestron C2N-SSC-2
26 • ILT Shade Controller: C2N-SSC-2 Operations & Installation Guide - DOC. 6318
C2N-SSC-2 Symbol Signal Descriptions (continued)
Signal Type & Name Description
Analog input:
<Sh1_Preset#>
Sets the preset number for which a position
will be saved (on the rising edge of
<Sh1_SetPreset>) or recalled (on the rising
edge of <Sh1_RecallPreset>).
Valid values range from 1d to 20d.
Out of range values will cause the save and
recall inputs to have no effect.
Analog input:
<Sh1_Position>
Sets Shade 1 position relative to the full range
of travel between the upper and lower limits.
Valid values range from 0d to 65,535d, which
is 0000h to FFFFh (upper limit).
Note: Only the most significant bits affect the
position.
0000h = No movement.
00xxh (where xx is any value between 01 and
FF) = Lower limit.
FFxxh (where xx is any value between 100
and FF) = Upper limit.
Analog output:
<Sh1_PosReport>
Reports the position of Shade 1 on the rising
edge of <Sh1_ReportPos>, and all
subsequent changes in position for as long as
<Sh1_ReportPos> is high.
Reported values range from 0d to 65,535d,
which is 0000h to FFFFh (upper limit).
Note: Only the most significant bits are
recognized position changes.
Analog input:
<Sh1_JogTime>
Defines the period that Shade 1 will jog open
or jog closed.
Valid values range from 0.05s (0.05 seconds)
to 2s (2 seconds).
Values above 2s will set the jog time to 2
seconds; values below 0.05s will set the jog
time to 0.05s.
Example Program
An example program for the Shade Controller is available from the
"Example Programs" section of the Crestron website
(http://www.crestron.com/exampleprograms
). Search for C2N-SSC-2.zip.