User Guide

ILT Shade Controller Crestron C2N-SSC-2
30 • ILT Shade Controller: C2N-SSC-2 Operations & Installation Guide - DOC. 6318
“Port Settings” Window
NOTE: The parameters shown in the illustration above are the port
settings for a 2-Series control system. Consult the Operations Guide for
the control system being used for exact parameter selection.
4. To verify communication, select Diagnostics | Establish
Communications (Find Rack). This should display a
window that gives the COM port and baud rate. If
communication cannot be established, refer to the
“Troubleshooting Communications” section in the latest
version of the Crestron 2-Series Control Systems Reference
Guide (Doc. 6256) or the respective Operations Guide for the
control system.