User Guide

FlipTop Data Center Crestron QM-FTDC
Cutout Dimensions
QM-FTDC (4006405) QMI-FTDC (4006874)
NOTE: Before inserting the QM-FTDC in the mounting hole, ensure that all
required cables have been installed.
Mounting Parts Supplied with the QM-FTDC
PART DESCRIPTION QUANTITY
Screw #6-32, Pan Head, Phillips 8
Screw #10, Pan Head, Phillips 4
Mounting Bracket 2
1. Install the eight supplied #6-32 screws, but do not tighten (four on the
front side and four on the rear side). These will be used to secure the
front and rear mounting brackets.
2. Position the QM-FTDC in the mounting hole.
Mounting Bracket Screw Locations
20 • FlipTop Data Center: QM-FTDC Operations & Installation Guide - DOC. 6312A