User Guide

Crestron QM-FTDC FlipTop Data Center
9. Build the program. The “Finish” window affords an opportunity to
set/reset network IDs and verify hardware network IDs.
10. After completing your SystemBuilder program, click the Build and
Upload System button .
SystemBuilder – “Finish” Window
Setting Net IDs in SystemBuilder
SystemBuilder provides a convenient method of selecting and assigning Net IDs
to devices.
1. Ensure that all network devices are connected to the control system.
2. After completing your SystemBuilder program, click the Build and
Upload button .
Operations & Installation Guide – DOC. 6312A FlipTop Data Center: QM-FTDC • 29