User Guide

FlipTop Data Center Crestron QM-FTDC
Specifications
Specifications for the QM-FTDC are given in the following table.
QM-FTDC Specifications
SPECIFICATION DETAILS
Cresnet Power Usage 8 Watts (0.33 Amp @ 24 VDC)
Default Network IDs 1A
Video Formats RGBHV (VGA), RGsB, YP
B
P
R
Video Detection Within 2 seconds
Firmware QM-FTDC.V.3.05.upg or later
2-Series Control System
Update Files
1,2
Version 3.125.CUZ (for QM-RMCRX-BA) or later
Connectors
Computer Input
(1) DB15HD female, video sensing on H-sync,
component video auto-detect
Computer Audio (1) 3.5mm mini-jack, computer soundcard type
Ethernet (1) RJ-45 passthrough connector
Ethernet/Telecom (1) RJ-45 passthrough connector
Communications (2) RJ-11 passthrough connectors
QuickMedia Output (1) RJ-45 CAT5E/CAT6
Cresnet (2) 4-pin terminal blocks
Ground (1) Ground Terminal
Microphone (2) 5-pin terminal blocks
Operating Temperature
and Humidity
41º to 104º F (5º to 40º C)
10 to 90% relative humidity
(non-condensing)
Dimensions and Weight
(Domestic Models)
Width: 6.75 in (17.13 cm)
Height: 5.39 in (13.68 cm) with top closed
Depth: 5.71 in (14.49 cm)
Weight: 4.05 lbs (1.84 kg)
Dimensions and Weight
(International Models)
Width: 8.50 in (21.58 cm)
Height: 5.58 in (14.17 cm) with top closed
Depth: 6.67 in (16.95 cm)
Weight: 4.80 lbs (2.18 kg)
Accessories QM-FTCMK Cable Management Kit
QMI-FTCMK International Cable Management Kit
FT-BTNB-L Button Kit
FT-BTNB-L-BLANK Button Kit
FT-BTNB-S Button Kit
FT-BTNB-S-BLANK Button Kit
International Adaptors for
QMI-FTDC Models
Refer to Appendix A on page 53
1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE
following these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
4 FlipTop Data Center: QM-FTDC Operations & Installation Guide - DOC. 6312A