User Guide

Crestron QM-FTMCSC FlipTop Media Center with Storage Compartment
QM-FTMCSC Symbol – Detail View of Microphone Controls
The parameters that are associated with QM inputs are stored in the transmitter.
Input compensation and Mic EQ are examples of this. This information is then
transmitted along with the digital audio. The DSP that does the compensation
and EQ are in the receiver, but the settings now travel with the audio signal.
When you have switchers in-between the transmitter and receiver, the program
does not have to keep track of the routes and recall the preset in the receiver for
these functions. Now the receiver automatically gets this information when the
route is made, with no programming required. In addition we send the Cresnet
ID (or a user defined number for systems with multiple Cresnets), which will be
used by the receiver to automatically recall the video peaking/gain/skew
parameters.
Operations & Installation Guide – DOC. 6307A FlipTop Media Center with Storage Compartment: QM-FTMCSC • 37