User Guide

Crestron QM-FTMCSC FlipTop Media Center with Storage Compartment
QM-FTMCSC Buttons - Signal Descriptions
SIGNAL TYPE
AND NAME
DESCRIPTION
Digital Outputs:
Button presses/vertical pair
<Press1>, <Press6>
Button presses/vertical pair
<
Press2>, <Press7>
Button presses/vertical pair
<
Press3>, <Press8>
Button presses/vertical pair
<
Press4>, <Press9>
Button presses/vertical pair
<
Press5>, <Press10>
Button presses/vertical pair
<
Press11>, <Press16>
Button presses/vertical pair
<
Press12>, <Press17>
Button presses/vertical pair
<
Press13>, <Press18>
Button presses/vertical pair
<
Press14>, <Press19>
Button presses/vertical pair
<
Press15>, <Press20>
Indicates that the corresponding button has been
pressed. The signal remains high for the duration of the
button press.
If the FlipTop cover is not fully open the buttons are
disabled and the unit will not report any button presses,
and will release any button that is already pressed. The
status of the cover is given by the <
FlipTopOpen>
output.
If two buttons are combined to form one larger button,
the same signal should be attached to both button
presses.
High/1 = Button pressed; Low/0 = Button released
Digital Inputs:
<fb1> through <fb20>
Activates the corresponding LED for as long as the
input is high.
If two buttons are combined, then only the LED for the
top button in the vertical pair will be visible.
High/1 (level sensitive) = Activate LED feedback; Low/0
= Turn off LED
Digital Output:
<
FlipTopOpen>
Indicates that the FlipTop cover is fully open. The
feedback remains high for as long as the cover is open.
If the cover is not fully open the signal will go low, the
keypad buttons will be disabled and the unit will not
report any button presses.
High/1 = FlipTop open; Low/0 = FlipTop not fully open
Analog Input:
<Bargraph1>
Sets the levels that will be displayed on the left
bargraph. The bargraph is an 8-segment LED and is
proportional to the input.
Valid values range from 0% to 100%.
Analog Input:
<Bargraph2>
Sets the levels that will be displayed on the right
bargraph. The bargraph is an 8-segment LED and is
proportional to the input.
Valid values range from 0% to 100%.
Example Program
An example program for the QM-FTMCSC is available from the “Example
Program” section of the Crestron website
(www.crestron.com/exampleprograms
). Search for QM-FTMCSC.ZIP.
Operations & Installation Guide – DOC. 6307A FlipTop Media Center with Storage Compartment: QM-FTMCSC • 41