User Guide

FlipTop Media Center with Storage Compartment Crestron QM-FTMCSC
rating of 15 ns/100 meters (100 meters = 328 feet), connecting the
QM-FTMCSC transmitter with 150 feet of cable to a QM-MD7x2 switcher,
and then using another 150 feet to connect the QM-RMCRX-BA receiver,
the accumulated skew over the entire 300 feet should not exceed 15 ns.
Specifications
Specifications for the QM-FTMCSC are given in the following table.
QM-FTMCSC Specifications
SPECIFICATION DETAILS
Cresnet Power Usage 8 Watts (0.33 Amp @ 24 VDC)
Default Network IDs 0A
Video Formats Composite, S-video, RGBHV, RGsB, YP
B
P
R
Video Detection Within 2 seconds
Firmware QM-FTSCSC.V.3.05.upg or later
2-Series Control System
Update Files
1,2
Version 3.125.CUZ (for QM-RMCRX-BA) or
later
Connectors
Computer Input
(1) DB15HD female, video sensing on
H-sync, and G/Y for component video
Computer Audio
(1) 3.5mm mini-jack, computer soundcard
type
Composite Video (1) RCA (yellow), video sensing
Composite Video Audio (2) RCA (red and white)
S-video
(1) Mini-DIN 4-pin, video sense on luminance
signal
S-video Audio (2) RCA (red and white)
QuickMedia Output (1) RJ-45 CAT5E/CAT6
Cresnet (2) 4-pin terminal blocks
Ground (1) Ground Terminal
Microphone (2) 5-pin Terminal Blocks
Video
Types Composite, S-video, and RGB/component
Video Sensing
Automatic sensing of composite, S-video
(luminance), component (G/Y), and RGB
(H-Sync)
Gain 0 dB (unity gain, 75 Ohm termination)
Maximum Input Voltage 1.0 V
p-p
Input Impedance 75 ohms
Bandwidth
(Composite &
S-video)
> 100 MHz (-3 dB) at unity gain
Max Resolution/Refresh
Rate (RGB)
1600 x 1200 @ 60 Hz vertical rate with
CAT5/5E/6 cable length of 100 meters and
skew rating ≤ 15 ns / 100 meters
H and V Sync (RGB) 5.0 V
p-p
max into 1 KΩ
Specifications continued on the following page.
4 • FlipTop Media Center with Storage Compartment: QM-FTMCSC Operations & Installation Guide - DOC. 6307A