User Guide

External Battery Pack for TPMC-8X Crestron TPMC-8X-BTPE
TPMC-8X Rear (showing alignment tabs)
NOTE: To prevent battery drain during shipment or for long-term
storage, the TPMC-8X has a battery switch inside the battery
compartment. To use the internal (or external) battery, move the
switch to the up (on) position. To conserve battery power when the
unit will not be used for extended periods, move the switch to the
down (off) position. (Refer to illustration on the following page.)
To access the battery switch, place the touchpanel screen-side
down on a clean, soft surface and remove the two Phillips head
screws that hold the internal battery compartment cover on the rear
of the touchpanel.
6 • External Battery Pack: TPMC-8X-BTPE Operations & Installation Guide – DOC. 6555