User Guide

Crestron TPMC-8X-BTPE External Battery Pack for TPMC-8X
TPMC-8X Internal Battery Switch
Removal
Use the following procedure to remove the TPMC-8X-BTPE from a
TPMC-8X touchpanel:
1. Place the touchpanel screen-side down on a clean, soft surface.
2. Squeeze both spring-loaded removal tabs and swing the top of the
TPMC-8X-BTPE away from the touchpanel (refer to illustration
on page 3).
3. Lift the TPMC-8X-BTPE to disengage the two alignment tabs
(refer to illustrations on page 2 and page 6) and remove it from the
touchpanel.
Operations & Installation Guide – DOC. 6555 External Battery Pack: TPMC-8X-BTPE • 7