Crestron MC2W 2-Series Integrated Wireless Control System Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Crestron MC2W 2-Series Integrated Wireless Control System Contents 2-Series Integrated Wireless Control System: MC2W 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications .............................................................................................................
Crestron MC2W 2-Series Integrated Wireless Control System 2-Series Integrated Wireless Control System: MC2W Introduction Features and Functions • • • • • • • • • • • • • 2-Series engine Cresnet® port – master/slave selectable 32-bit Freescale Coldfire® processor 36 MB of Internal Memory* Four IR/serial ports Two Com ports (RS-232/422/485) Four low-voltage relay ports Four Versiport I/O ports Built-in 1-way RF wireless gateway IR wireless compatible using CNXRMIRD (not included) Antenna for one-way RF co
2-Series Integrated Wireless Control System Crestron MC2W Cresnet® Cresnet is the communications backbone for many Crestron touchpanels, keypads, lighting controls, and other devices. The Cresnet bus is a simple, yet flexible 4-wire network that provides rock-solid bidirectional communication for numerous Cresnet devices. Cresnet Slave Mode Selectable Cresnet Slave Mode enables the MC2W to be configured as a Cresnet slave device, effectively transforming it into a Cresnet expansion module.
Crestron MC2W 2-Series Integrated Wireless Control System MC2W Specifications (Continued) SPECIFICATION DETAILS Dimensions Height 1.70 in (4.32 cm) without feet; 1.80 in (4.58 cm) with feet Width 17.03 in (43.24 cm) without ears; 19.00 in (48.26 cm) with ears Depth 9.07 in (23.03 cm) Weight 4.3 lbs (2.
2-Series Integrated Wireless Control System Crestron MC2W MC2W Overall Dimensions 2 4 3 1 5 17.03 in (43.24 cm) PWR HW-R SW-R 1.70 in (4.32 cm) MSG NET SIG 7 6 8 9 COM A IR SERIAL OUT IR IN I/O 12 11 10 COM B COMPUTER 13 14 NET 24 Y Z G 24VDC 1.0A RELAY OUT 9.07 in (23.03 cm) Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS 1 PWR LED Indicates 24 Volts DC power supplied from Cresnet control network or external power supply.
Crestron MC2W 2-Series Integrated Wireless Control System Connectors, Controls & Indicators (Continued) # 7 CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION INFRARED-SERIAL OUTPUT (A – D)3, 4 (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port, allowing simultaneous firing of all ports. A B C D S G S G S G S G IR SERIAL OUT 8 (1) 3-pin 3.
2-Series Integrated Wireless Control System Crestron MC2W Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS 12 COMPUTER COMPUTER Pin 1 Pin 9 DESCRIPTION (1) DB9 female, RS-232 computer console port. Connector is used when programming with a PC. The port is modem compatible (modem and PC cables not included). Supports baud rate of up to 115 kB. Use with a standard DB9 straight through cable. Pins 1, 4, 6 and 9 are not used but may be connected.
Crestron MC2W 2-Series Integrated Wireless Control System Industry Compliance As of the date of manufacture, the MC2W has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
2-Series Integrated Wireless Control System Crestron MC2W Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Crestron MC2W 2-Series Integrated Wireless Control System Installation Ventilation The MC2W should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications. Consider using forced air ventilation and/or incrementing the spacing between units to reduce overheating.
2-Series Integrated Wireless Control System Crestron MC2W Ear Attachment for Rack Mounting (this image shows a 1RU device) USE COVER SCREWS 4. Bussing Strip Installation Stacking Repeat procedure (steps 1 through 3) to attach the remaining ear to the opposite side. The MC2W is supplied with a brass bussing strip to facilitate commoning (linking) of multiple terminal block connections.
Crestron MC2W 2-Series Integrated Wireless Control System Hardware Connections for the MC2W COM: TO ANY RS232, -422, OR 485 DEVICE ANTENNA: FOR RF SIGNALS FROM TRANSMITTER DEVICE COMPUTER: TO PC SERIAL PORT POWER: TO POWER PACK (24VDC, 1A OUTPUT) ANTENNA COM A A C R EST RO N E L EC T R O N IC S INC . R O C K L EIG H, N.J . 0 7 6 4 7 USA IR: TO IRP2 OR SERIAL DEVICES B C S GS G S GS G IR SERIAL OUT IR RECEIVER: FROM CNXRMIRD FOR RC5 CODE COM B COMPUTER NET 24 VDC 1.
2-Series Integrated Wireless Control System Crestron MC2W Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Crestron MC2W 2-Series Integrated Wireless Control System Programming with Crestron SystemBuilder Crestron SystemBuilder is the easiest method of programming but does not offer as much flexibility as SIMPL Windows. For additional details, download SystemBuilder from the Crestron website and examine the extensive help file. Programming with D3 Pro Crestron’s D3 Pro lighting software provides all the tools necessary to create a complete Crestron lighting system for residential applications.
2-Series Integrated Wireless Control System Crestron MC2W Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, or firmware) can be transferred to the control system (and/or device).
Crestron MC2W 2-Series Integrated Wireless Control System Operation Crestron 2-Series Control Systems are the brain of a complete integrated audio/visual or automation solution, serving as the central processor and I/O interface. Every audio, video and environmental element of the home, boardroom, classroom or command center becomes integrated and accessible through the control system.
2-Series Integrated Wireless Control System Crestron MC2W Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. MC2W Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Unexpected response from control system. Network devices are not communicating with the control system. Use Crestron Toolbox to poll the network.
Crestron MC2W 2-Series Integrated Wireless Control System MC2W Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION RF device commands are not received. Incorrect operating frequency set in SIMPL Windows. Set correct operating frequency in SIMPL Windows. A/V system device does not respond. IRP2 or serial port not placed properly. Verify placement of IRP2 (Hold phosphor card under IRP2 while pressing button) and tighten serial cables. Used wrong IR/Serial port.
2-Series Integrated Wireless Control System 6. Crestron MC2W While powering up the MC2W, press Alt+K then Enter, repeating Alt+K then Enter on the keyboard until the following text (or similar) appears in Toolbox. System Monitor [v1.001 (0001)] 12-19-01 16:25:23 32MB RAM, 4MB FLASH CS> 7. At the Toolbox prompt, type erase and press Enter. The following text appears in Toobox. CS>erase ->25%->50%->75%->100% Done CS> 8.
Crestron MC2W 2-Series Integrated Wireless Control System Check Network Wiring Use the Right Wire In order to ensure optimum performance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used. Failure to do so may incur additional charges if support is required to identify performance deficiencies because of using improper wire. Calculate Power CAUTION: Use only Crestron power supplies for Crestron equipment.
2-Series Integrated Wireless Control System Crestron MC2W Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number.
Crestron MC2W 2-Series Integrated Wireless Control System Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
2-Series Integrated Wireless Control System Crestron MC2W If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron MC2W 2-Series Integrated Wireless Control System Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6143A (2002129) 06.07 Specifications subject to change without notice.
